In late 1973, the price of copper on world markets rose to a point where the metallic value of the cent was almost equal to its
face value. The US Mint, which produces billions of cents annually, was faced with a potentially catastrophic operating deficit due to issues of
seigniorage. As a result, the Mint tested alternate metals, including aluminum and
bronze-clad steel. A composition of 96% aluminum (with
trace elements for stability) was chosen. The composition was chosen due to its longevity on
coin die use and aluminum's high resistance to
tarnishing. Although they were produced in 1973, they were struck using 1974 dated dies in anticipation of release into circulation in that year. which felt the aluminum coins would jam machines and cause other mechanical problems. Opposition also came from pediatricians and pediatric radiologists who pointed out if children ingested the aluminum pennies, they would be difficult to detect using
X-ray imaging because the
radiodensity of the metal inside the respiratory and gastrointestinal tracts was similar to that of soft tissue. After the setback, the US Mint recalled the coins, but about 12 to 14 although the legality of the cent is questioned by numismatists. it has been difficult to estimate their value. While there are no Mint records of the 1974-D aluminum cent being struck at the Denver Mint, in an interview with
Coin World, Benito Martinez, a die setter at the Denver Mint in 1974, stated he struck fewer than 12 of the experimental 1974-D Lincoln cents under the supervision of Harry Bobay, a Denver Mint production foreman. The strikes were made using regular production dies on aluminum blanks supplied from the Philadelphia Mint. The coin is considered by a few
numismatists not as a
pattern coin, but rather a
rejected or canceled regular issue, despite being listed in pattern books. == Toven Specimen ==