The Virus has had three major hardware revisions since the original Virus A model as well as having numerous features (both minor and major) added via
firmware operating system updates. The Virus engine largely remained the same from the Virus A up until the Virus C. They all utilize a single
Motorola DSP chip and the sound is quite distinct between models when not factoring in the additional features provided by each hardware and firmware upgrade. The biggest effect of software optimisation is seen as a third oscillator control in the B-series menus. The Virus TI utilizes two DSP chips and represented the most significant technical overhaul of the Virus series since its inception. The Virus TI series allows for a very wide emulation of past and present synthesizers. It is a digital synthesizer but can emulate the characteristic sound and behaviour of analogue synthesizers whilst also retaining some digital features. What separates the Virus's VA module from other analogue modelling synths in its price range is its twin multimode filter design and extensive modulation matrix. As of the Virus B OS4 update, it has three oscillators per voice (+1 sub oscillator per voice) with two filters per voice. The basic Virus analogue modeled oscillators between the Virus A and TI are identical with the only difference being the number of voices available as well as the additional Hypersaw oscillator and digital
wavetable oscillators of the Virus TI. Additionally, the raw Virus oscillators have much less high frequency content than the oscillators found on other subtractive virtual analogues such as the
Clavia Nord Lead and
Roland JP-8000. The highly resonant twin multimode filter is also an important aspect of the Virus sound, the features of which have been extended in the Ti range to include
grain table,
comb and
formant filter settings. Both Virus filters can be connected in series, parallel or set to process two oscillators independently. The routable nature of the filter allows the Virus to emulate an 18 dB/octave 3-pole filter for instance, by routing a 24 dB/octave 4-pole filter in series with a 12 dB/octave 2-pole filter, then turning the filter balance to 3 or 9 o'clock. Connecting a 4-pole filter in series with a 2-pole filter also allows for a 36 dB/octave 6-pole filter configuration, which is unique amongst similarly priced virtual analogues. The interchangeable filters allow for such things as simultaneous high pass and low pass sweeps and filter modulation effects such as automated filter sweeps whilst still leaving a filter free for manual use. Every parameter on the control surface of the synth and every parameter in every sub menu can be set as a modulation destination. The Virus also has a list of modulation sources, including a random trigger. There are three modulation sources on the Virus A and B, which can be set to control six destinations. The Virus C and TI both allow for six modulation sources controlling a possible 18 modulation destinations. This does not include the three LFOs which can be set to modulate oscillators 1 and 2, pulse width, resonance and cutoff of both filters, stereo pan and any parameter set as a source in the modulation matrix, simultaneously if desired. It is possible to emulate the unstable tuning of analogue synthesizers by setting a random source to modulate the pitch and detune of one or more oscillators, so that every time a note is played, its tuning will be very subtly different. The modulation matrix also allows for recursive modulation - setting a variable to modulate itself. This plays an important role in altering the behaviour of many of the control variables on the synth. For example, the Virus amplifier attack envelope is linear by default but can be changed via setting the amplifier envelope as a modulation source that modulates itself as its destination. The Virus also has a complement of DSP effects, including a
distortion unit that allows for rectification, analogue modelled and digital distortion, as well as bit-reducing and sample rate-reducing effects. The Virus C and TI also includes a 3-band
EQ. Lastly, the Virus has always been 16 parts
multitimbral for multilayered patches and ensemble performances. However, up until the Virus TI, this aspect of the Virus has been severely flawed and is often considered unusable because of the polyphonic limitations of the Virus A, B and C. The programming methodology for a Virus A is largely the same as that of a Virus TI and so are the bulk of the sounds produced. However, the additional oscillators, higher polyphony, extra filter type, the EQ and revised control surface and sequencer integration of the TI allow for a greater palette of possible sounds over previous revisions. There were hardware alterations made to the TI such as the balanced inputs/outputs, 24 bit/96 kHz output and the new sequencer integrated interface. The Virus TI Snow was unveiled at the
NAMM Show in January 2008. It is a stripped-down version of the TI Desktop and is patch compatible with the rest of the TI line. It is much smaller, sporting a minimalist interface and utilizes a single DSP chip, giving it about half the polyphony and only four parts of multitimbral capability. == Notable users ==