Akita Shinkansen

The groundbreaking ceremony for the Akita Shinkansen was held in front of Akita Station on 13 March 1992, and track work began the same month. JR East introduced a continuous track renewal machine imported from the United States—the first time such equipment was used in Japan—significantly reducing labor requirements and construction time. Construction proceeded in stages. A parallel single standard-gauge track was added to the section of the Ōu Main Line between Ōmagari and Akita. In addition, on the section between Jingūji and Mineyoshikawa, a third running rail was installed on one of the narrow-gauge tracks, allowing mini-Shinkansen trains to operate over either track. The final stage converted the narrow-gauge Tazawako Line between Morioka and Ōmagari to standard gauge and included construction of a connecting ramp at Morioka linking to the Tōhoku Shinkansen, completed in December 1996. The segment between Morioka and Akita began operating on 22 March 1997 Services between Ōmagari and Akita were suspended from 22 to 29 July 2017 due to flooding after heavy rainfall. Services north of Nasushiobara Station were suspended on 13 February 2021 following the 2021 Fukushima earthquake. On 6 March 2025, following the uncoupling of Hayabusa–Komachi 21 near Nishi-Nippori Station, coupled operations with Hayabusa services were suspended until further notice, and passengers travelling between Tokyo and Akita were advised to transfer at Morioka Station. ==Operations==

Services consist of Komachi trains which are 7-car E6 series mini-shinkansen sets coupled with E5 series Hayabusa trains for the portion of the journey between Tokyo and Morioka. The Komachi services run at a maximum speed of on the Tohoku Shinkansen, and between Morioka and Akita, run as 7-car independent trains with a maximum speed of . However, is more typical for the line through the hills east of Akita, with trains frequently slowing to for curves such as those south of Ugo. The line from Morioka to Akita is prone to deep snow. The fastest timetabled journey between Akita and Tokyo currently takes 3 hours and 37 minutes calling at four or five stops in between. Rolling stock As of March 2020, the following types are used on Akita Shinkansen services. • E6 series 7-car sets, since 16 March 2013 Former rolling stock • E3 series 6-car sets (originally 5-car sets) withdrawn by 15 March 2014 Non-revenue-earning-types • East i (E926) Stations Between Tokyo and Morioka, the stations are the same as the Hayabusa service on the Tōhoku Shinkansen. Between Morioka and Akita, the stations are as shown below. Legend: ==References==