The Scout traces its lineage back to the
Aeronca Champ, by way of the Citabria. Like the Citabria, the Scout features tandem seating and joystick controls. The
fuselage and
tail surfaces are constructed of welded metal tubing. The outer shape of the fuselage is created by a combination of wooden
formers and
longerons, covered with fabric. The cross-section of the metal fuselage truss is triangular, a design feature traceable to the earliest
Aeronca C-2 design of the late 1920s. The strut-braced
wings of the Scout are, like the fuselage and tail surfaces, fabric covered, utilizing
aluminum alloy ribs. The wings of Bellanca Scouts were built with wooden
spars. American Champion has been using aluminum spars in the aircraft it has produced and has, as well, made the aluminum-spar wings available for retrofit installation on older aircraft. Compared to the Citabria's wingspan of , the Scout's
wingspan is significantly wider, at over . The Scout also carries wing
flaps, a design feature it shares with the 7GCBC variant of the Citabria. The added wing area and the flaps contribute to the Scout's STOL abilities and its capacity as a utility aircraft. The landing gear of the Scout is in a conventional arrangement. The main gear legs of most Scouts are made of
spring steel, though American Champion began to use
aluminum gear legs in 2004. Compared to the Citabria's gear, the Scout's gear legs are considerably taller and the tires larger, again contributing to its capabilities as a utility aircraft. Bellanca made the Scout available with several
Lycoming O-360 engine variants, all of 180 horsepower (134 kW), with the choice of a fixed-pitch or
constant speed propeller. American Champion's Scouts feature the Lycoming O-360-C1G and a choice of a two-blade constant speed propeller (standard) or a three-blade constant speed propeller as an option. == Operational history ==