The AMS-IX platform is continually evolving due to its rapid growth in traffic and number of connected member ports. Up until the end of 2009, it was using a redundant
hub-spoke architecture using a core switch and multiple edge switches. This double-star topology had the advantage of being able to perform maintenance on the network without any impact on customer traffic, and to anticipate on fiber and equipment problems by (automatically) switching to the backup topology as soon as a failure in one of the active components occurs. The active switching topology star is determined by means of the
VSRP protocol. This topology is AMS-IX version 3. However, since 2009; AMS-IX platform has migrated from a pure Layer2 network to a VPLS/MPLS network (using Brocade hardware) in order to cope with future growth (this is AMS-IX version 4). AMS-IX members connect to the platform with 1, 10, 100 Gbit/s Ethernet connections, or using multiple
gigabit or
10 gigabit aggregated ports, utilizing the
802.3ad standard. Gigabit Ethernet and lower speed ports are directly connected to Brocade -
Foundry Networks BigIron 15000 or RX-8
network switches. 10 gigabit member ports are connected to
Glimmerglass Systems photonic switches which maintain an optical connection to the stub switch on the currently active side of the network, following the VSRP protocol. For each 10-gigabit port there is an active and a backup stub switch, for which BigIron RX-8, RX-16 or NetIron MLX-16 switches are used. The core consists of two Brocade NetIron MLX-32 switches, to which all edge switches are connected using 10 gigabit aggregated connections and
WDM technology. With the new VPLS/MPLS setup; the BigIron RX and legacy BigIron 15000 are no longer in-use. AMS-IX has migrated all the hardware to the MPLS-capable MLX platform. Stub switch is either MLX-8, MLX-16 or MLX-32. Since May 2011, AMS-IX engineers have started testing 100GE along with LimeLight Network. ==See also==