Ards come in a number of varieties. Based on use, there are two kinds: the
tilth ard, for cutting furrows in cleared land, and the
rip ard, or sod buster, which has a hooked share that gouges deeper into the soil and more effectively clears virgin or
fallow land. The two were in early times used in conjunction with each other. Third is the
seed drill ard, used specifically in
Mesopotamia, which added a funnel for dropping seed in the furrows as the ard cut them. The earliest and most basic tilth ards are the two-piece models: •
bow ard (or
beam ard), made of a bow-shaped draft-pole (or beam) originally pierced by a spear-like head (stilt & share), later developing a composite body with a separate head and stilt inserted in the pole; •
body ard, where the draft-pole is inserted into the thicker upward-inclined head which tapers into a handle. The bow ard is the weaker, narrower, and probably earlier of the two. It is used for shallow tillage, normally with a tang share, in dry, stony soils. It is restricted mainly to the
Mediterranean (
Spain,
Tunisia,
Greece,
Turkey,
Syria,
Lebanon),
Ethiopia,
Iran, and eastern
India and
Sumatra. The more widespread body ard, sturdier and heavier for deeper tillage (in soils with enough moisture), usually has a socket share which is sometimes laterally extended or has serrated wings (
Balkans,
Morocco,
Portugal, Spain) for better mixing of soil and cutting of weeds. It had a short portion of the body which was first made to slide on the furrow bottom and gradually developed into a horizontal body. The body ard dominates in Portugal, western Spain, the Balkans,
India,
Sri Lanka,
Malaysia,
Thailand,
Japan, and most of
Latin America. The bow ard favored the development of a long horizontal sole body (slade) sliding on the ground. This led to the
sole ard, first attested in
Bronze Age Cyprus, being single-handled and consisting of a flat sole (or slade) into which were set the draft-pole and stilt, meaning there were three separate pieces. Their use in
Ancient Greek agriculture was described by
Hesiod. In northern Europe the single-handled
crook ard was favored, consisting of a stilt inserted into a pole with a crook-shaft, i.e., the pole had a curved shape and had a natural crook tip that served as a share. Later variations of the sole ard come in two types: the triangular and quadrangular ards. The
triangular ard has a horizontal sole body holding the beam and stilt which cross each other, forming a triangle at the base. The
quadrangular ard has a horizontal sole body connected to a straight, nearly parallel beam by a stilt and a brace. ==History==