MarketArmstrong Whitworth AW.681
Company Profile

Armstrong Whitworth AW.681

The Armstrong Whitworth AW.681, also known as the Whitworth Gloster 681 or Hawker Siddeley HS.681, was a projected British long-range STOL military transport aircraft design of the early 1960s. Developed by manufacturer Armstrong Whitworth Aircraft, it was intended to be capable of achieving both Short Takeoff and Landing (STOL) and Vertical Takeoff and Landing (VTOL) performance.

Development
Background By 1960, several major British programmes in the field of military transport aircraft had been terminated or curtailed, such as the Short Belfast and the Vickers V-1000; according to author Derek Wood, these outcomes had been largely due to a lack of meaningful support from their principal customer, the Royal Air Force (RAF). Proposals were received from various manufacturers. The British Aircraft Corporation (BAC) decided to offer two designs; the BAC.222, which was a local development of the American Lockheed Hercules, and the indigenously developed BAC.208, which would have been furnished with deflected-thrust engines and multiple lift fans. According to Wood, the BAC.222 proposal had good long-term production prospects and represented an excellent solution to the requirement; he also noted that Lockheed and BAC aggressively lobbied for its construction. Selection There was a lengthy interval between the submissions and the British government making decisions regarding the requirement. A second issue of the requirement called for the presence of four deflected thrust engines, which were to be suitably augmented by several lift engines housed underneath the wings to allow the aircraft to achieve a viable Vertical Takeoff and Landing (VTOL) capability. Armstrong Whitworth issued revisions of their AW.681 proposal to accommodate this new need; these revised submissions incorporated vectored thrust nozzles and boundary layer control (BLC) amongst other features; there was also considerable interest in adopting the Rolls-Royce Pegasus engine. BAC also revised their designs in line with the requirement change, although Wood notes that Armstrong Whitworth had already emerged as the front runner for selection around this time. On 5 March 1962, Julian Amery, the Aviation Minister, announced that the Government had authorised the go-ahead for the HS.681 and that, in addition to a detailed project study being conducted, a prototype of the aircraft was projected to perform its maiden flight during 1966. Armstrong Whitworth pursued a last-minute effort, promoting the development of a non-STOL version of the HS.681, designated the HS.802. To achieve lower costs, this proposal would have had the same wings and engines as had been used on the HS.801 Nimrod maritime patrol aircraft. Wood notes that the redesign, while likely being cheaper, came at the sacrifice of the type's STOL capabilities. Wood critiqued the programme and its cancellation, attributing some responsibility to overly-ambitious requirements of the RAF that had pushed the limit of aircraft capabilities, as well as the failure to settle those requirements. ==Design==
Design
In its basic configuration, the AW.681 was a monoplane with a circular cross-section fuselage, featuring a swept shoulder-mounted wing and a high T-tail. The AW.681 was to have been powered by an arrangement of four Rolls-Royce RB.142 Medway turbofan engines; these would have been combined with a series of vectored thrust nozzles mounted upon pylons underneath the wings. The selection of the powerplant was subject to a considerable fight between engine manufacturers Rolls-Royce and Bristol-Siddeley. Ultimately, Armstrong Whitworth opted for the RB.174-11 model of the Medway, which was projected to generate a maximum thrust of 13,800lb, although more powerful models would have attained around 20,000lb according to Rolls-Royce. For improved STOL/VTOL performance, deflectors were to be installed around the engines. As designed, the AW.681 was set to feature boundary layer control (BLC), which would have used blown flaps mounted upon the leading edges of the wing; the ailerons, flaps, and slats would all have been operated using blown air. Both approaches were proposed as being capable of obtaining a realistic VTOL capability. ==Specifications (proposed STOL)==
tickerdossier.comtickerdossier.substack.com