The Autokon 8400, introduced in 1975, used a
laser beam to scan pages up to 11 by 14 inches at a maximum resolution of 1000
lines per inch. Although it was only capable of scanning in 1-bit monochrome, the on-board processor was capable of halftoning,
unsharp masking, contrast adjustment, and
anamorphic distortions, among other features. The Autokon 8400 could either be connected to a
film recorder to create a negative for producing plates or connected to a mainframe or minicomputer for further image processing and digital storage. The Autokon 8400 enjoyed widespread use in newspapers—ECRM shipped 1,000 units to newspaper publishers by 1985 In 1988, ECRM introduced the 1000/DE (digital enhancement), which used a microprocessor to produce the sharpening effect as against the 8400 which used analog electronics and an optical method to create sharpening. The Autokon 1000/DE had a touchpad rather than analogue rotary controls. The Autokon 1000/DE had applications in both commercial and newspaper environments where only a single halftone was required, i.e.
black and white. While typically the Autokon 8400 was a standalone output device that scanned and then output to either photosensitive, roll format bromide paper or film, the Autokon 1000/DE was often connected to
Macintoshes or
IBM PC compatibles via a dedicated interface such as those from HighWater Designs. The last Autokon was a wider format, online-only device which utilized both a red and green laser to improve the response to the scanning of color photographs. ECRM continued selling Autokons into 1995. The line disappeared from the company's catalog between then and 1998. After selling its remaining
platesetter assets to
Kodak in 2021, ECRM quietly dissolved. ==See also==