Backup camera

The design of a backup camera is distinct from other cameras because the image is horizontally flipped to produce a mirror image. This is necessary because the camera and the driver face opposite directions; without this adjustment, the camera's right would be on the driver's left and vice versa. A mirrored image makes the orientation of the display consistent with the physical mirrors installed on the vehicle. A backup camera typically utilizes a wide-angle or fish-eye lens. Although such lenses may limit the camera's ability to capture distant objects, they allow the camera to see an uninterrupted horizontal path from one rear corner to the other. The camera is typically pointed at a downward angle to view potential obstacles on the ground. Backup cameras use dashboard screens that are also used with GPS navigation systems. Inside the vehicle, the display is typically wired to automatically activate when the transmission is set to reverse, showing the backup view on the dashboard screen while the vehicle is in reverse and/or providing grid guidelines to aid the driver. ==Variations==

Different varieties of backup cameras for different applications: • Aftermarket addition: Backup cameras can be added to vehicles that do not come with factory-fitted systems. They are available in both wired and wireless versions. • Large vehicle system: For large vehicles such as motorhomes, camera systems with built-in servomechanisms allow the driver to remotely pan and tilt the camera. • Wireless backup camera: These come with a wireless camera and receiver, which makes them easier and cheaper to install than wired versions. • Built-in audio intercom: Used in addition to the camera system for communicating with a spotter outside the vehicle, common when backing large trailers or launching boats. • Night vision camera: Use a series of infrared lights for backing in the dark when the vehicle's white reverse lights are insufficient. rearview mirror backup camera with distance guidelines • Portable or semi-permanent all-in-one camera system: Also known as dashboard cameras or dashcams, these are typically sold for vehicles that don't have displays permanently installed in the dashboard. Such systems consist of a small portable screen that can be affixed on the dashboard or on a rearview mirror, and a length of wire to reach the cameras, including a backup camera. • Some backup and rear cameras are connected to displays on the rearview mirror and are used in vehicles to detect activity behind the car to "avoid the tooling, software, hardware, and testing costs associated with integrating the display/feature in other areas of the vehicle." • License-plate-frame version: Permit installation without any permanent vehicle modifications. • Custom camera: Brake light cameras combine a camera with brake light functionality. Some backup cameras also use LEDs surrounding the camera lens to illuminate the surroundings while in use. ==History==

The first backup camera was used in the 1956 Buick Centurion concept car, presented in January 1956 at the General Motors Motorama. The vehicle had a rear-mounted television camera that sent images to a TV screen on the dashboard in place of the rear-view mirror. The 1972 Volvo Experimental Safety Car (VESC) also had a backup camera, but this feature did not make it into the subsequent Volvo 240 model. The first production automobile to incorporate a backup camera was the 1987 Toyota Crown, which was only available in Japan. The Toyota system used a color EMV screen with a rear-spoiler-mounted CCD camera. In April 2000, Nissan's Infiniti division introduced the Rear View Monitor on the 2002 Infiniti Q45 flagship sedan. Using colored on-screen guidelines as a parking distance parameter, the Rear View Monitor operated from a license-plate-mounted camera in the trunk that transmitted a mirrored image to a 7-inch in-dash LCD screen. It was available as optional equipment at the North American launch in March 2001. The 2002 Nissan Primera introduced the Rear View Monitor backup camera system to territories outside Japan and North America. Aftermarket options for cars have been available for some time with electronics manufacturers offering multiple car upgrades that can be installed by professionals without replacing the car's center console. ==Others types of camera==

Surround-view cameras Infiniti introduced the first surround-view cameras, making the system available on the 2008 EX35 and marketing it as the Around View Monitor. The system used four cameras located at the front, back, and sides of the vehicle, feeding images to an image processing unit to create a synthetic but positionally accurate top-down view of the car and its surroundings. In most modern systems, the pictures appear in such detail that it's difficult to believe they were not taken from above the vehicle. Other manufacturers have since offered similar systems, such as Bird's Eye View Camera (Toyota) and Surround Vision (Chevrolet). Side mirror cameras First offered in October 2018, the Japanese market Lexus ES can be optioned with cameras as side view mirrors. This feature is also offered on the Audi Q8 e-tron and Hyundai Ioniq 5. Wireless backup camera These advanced cameras do not require cables between the camera and the display, functioning remotely. They typically switch on automatically when the reverse gear is engaged. Some models used solar energy for power. ==Mandates==

The following countries have laws that mandate backup cameras for all new vehicles. United States and Canada In the United States, the Cameron Gulbransen Kids Transportation Safety Act of 2007 required the United States Department of Transportation to issue backup-collision-safety regulations within three years and require full compliance within four years after final rulemaking. The statutory deadline for issuing the final regulations was February 2011. However, the USDOT repeatedly extended the deadline to analyze costs and benefits of the requirement. In September 2013, Greg Gulbransen, the father of the child after whom the law was named, along with a group of consumers and advocates, submitted a petition to the Second Circuit Court of Appeals, demanding that the USDOT implement regulations on backup cameras within 90 days. About half of model year 2012 automobiles were equipped with backup cameras. On March 31, 2014, three years past its deadline, the U.S. National Highway Traffic Safety Administration announced that it would require all automobiles sold in the United States built beginning in May 2018 to include backup cameras. On October 31, 2016, Transport Canada issued a similar mandate beginning at the same time. == See also ==