capping shells with '106' (instantaneous) fuzes. It is sometimes claimed that creeping barrage was first used during
World War I in the battle of Gorlice in May 1915 (part of the
Gorlice–Tarnów offensive) by General
Tadeusz Rozwadowski, but in fact infantry assault was simply preceded by a four-hour shelling of the Russian defences. The
first day of the
battle of the Somme saw another attempt at a large-scale creeping barrage which had been planned in anticipation of the infantry's anticipated ability to advance relatively unhampered across the battlefield due to a heavy, week-long preparatory bombardment. For example, on
XV Corps front, the barrage was programmed to lift every minute. Complications arose however in British protocols to prevent friendly-fire casualties which at the time dictated that shellfire was to be kept over away from their own uncovered infantry. In many cases
no man's land was narrower than the allowable 'safe' distance and as such the barrage did not protect the men as they went 'over the top' and advanced towards the German trenches. Further, as the British infantry was slowed far beyond the expected pace of advance across no-man's land, all along the Somme front it proved impossible for the infantry to keep up with the pace of the barrage. However, the tactic was further refined as the Battle of the Somme wore on and by September 1916 the creeping barrage became a standard tactic for infantry attacks, and soon spread to the
French Army, enabling the French recapture of
Fort Vaux at the
Battle of Verdun in November 1916. By the later stages of the Battle of the Somme, the British had improved the accuracy of and confidence in their artillery fire and had learned the lessons of keeping infantry close to the barrage: the
British Expeditionary Force (BEF) circulated an aerial observer's report commending a "most perfect wall of fire" followed up within by the infantry of
50th (Northumbrian) Division, enabling them to take a village with little opposition. A report said "Experience has shown that it is far better to risk a few casualties from an occasional short round from our own artillery than to suffer the many casualties which occur when the bombardment is not closely followed up". A creeping barrage was essential to the success of the
Canadian Expeditionary Force in the capture of
Vimy Ridge in April, 1917. The creeping barrage was used during the
action of Tell 'Asur on 12 March 1918 in the
Sinai and Palestine Campaign. Six months later, it was used with devastating effect during the
Battle of Megiddo (1918) when 18-pdr and
Royal Horse Artillery formed a creeping barrage which fired in front of the advancing infantry up to their extreme range while 4.5-inch howitzers fired beyond the barrage, while heavy artillery were employed in counter battery work. The creeping barrage moved at a rate of between , and per minute. . At first, British creeping barrages consisted only of shrapnel shells but an equal mix of
HE was soon added, in some cases later supplemented by smoke shells. The creeping barrage would advance at a rate of every one to six minutes, depending on terrain and conditions; although six minutes was found to be too slow. By the
Battle of Arras in 1917, the creeping barrage was huge and complex, with five or six lines of fire covering a depth of ahead of the infantry. Back barrages were fired, in which rearmost lines of the barrage reversed direction, and machine gun barrages were introduced. False barrages attempted to deceive the enemy about Allied intentions or to force him to reveal his positions. The creeping barrage was used to great effect in the Canadian success at the
Battle of Vimy Ridge where the men had been extensively trained to move forward in the 'Vimy Glide'a 100-yard per three minute pace () which kept the infantry directly behind the barrage. The opening attack of the
Battle of Passchendaele was covered by a barrage of shrapnel and HE on a colossal scale, fired by over 3,000 British guns and howitzers: one
18-pounder for every of front, and a heavy howitzer for every , with yet more guns in the French sector. The British barrage advanced every four minutes, with the infantry following as close as from the bursting shells. One battery's programme required 45 lifts. As each objective was reached, the barrage settled beyond the new position, combing back and forth to disrupt expected German counter-attacks, while some of the artillery moved forward to support the next phase of the advance. On the
Eastern Front, German Colonel
Georg Bruchmüller developed a form of double creeping barrage, with the first line of the barrage consisting of gas shells. His ideas were applied on the
Western Front in the
German spring offensive of 1918. The day of the lengthy large-scale preliminary barrage had largely passed by the end of World War I, at least in Western nations, with the realisation that best results were achieved by neutralising the enemy rather than attempting his physical destruction, and that short, concentrated bombardments, including creeping barrages, were more effective in neutralising the enemy than extended bombardment. Once open warfare returned after the breaking of the
Hindenburg Line in September 1918 the British fired far fewer creeping barrages, using more lifts and concentrations instead. Attacks by tanks do not need the same form of artillery support, and the single barrage along the entire front of the advance had even been abandoned by the
battle of Cambrai in 1917. More sophisticated fire control enabled infantry to call down artillery fire in direct support, or targeting of identified enemy positions. Nevertheless, barrages remained in use. On 31 August 1918 the attack of the
U.S. 32nd Division was preceded by a walking barrage. After first passing over the German line, the barrage returned twice more, attempting to catch the defenders returning to their firing positions from their dugouts, or to keep them underground when the real assault went in. ==Use in World War II==