Biomedical equipment technician

BMETs must conform with federal and state regulations and local standards on medical device safety. Most biomedical systems must also have recorded documentation to show how equipment has been managed, modified, tested, and delivered. In addition, biomedical systems are used according to a planned and approved process that increases the quality and safety of diagnostics and therapeutic equipment with a core aim of minimising the risk of injury, harm, or death to patients and staff. In the United States, BMETs may operate under various regulatory frameworks. Clinical devices and technologies are generally governed by the Food and Drug Administration (FDA), National Fire Protection Agency (NFPA) particularly NFPA 99 and chapter 7, NFPA 70, Life Safety Code 101, Code of Federal Regulations (CFR) 21, Occupational Safety and Health Administration (OSHA), The Joint Commission (TJC) hospital or Accreditation Association for Ambulatory Health Care (AAAHC) standards; and ensures compliance with these codes and standards for the US government registry of biomedical devices. Other countries typically have their own mechanisms for regulation. == Biomedical equipment technology training ==

Traditionally, biomedical equipment technology has been an interdisciplinary field to specialize in after completing an associate degree in Biomedical Equipment Technology, biomedical electronics technology, or biomedical engineering technology. Some BMETs get their training through the military. Most entry-level BMETs enter into the field with a 2-year associate degree in biomedical equipment technology, or they spend about one year in full-time military training. A 4-year graduate is a health technology management (HTM) professional who can perform official medical equipment management duties as a clinical engineer, clinical engineering manager or director of clinical engineering. Practical experience should be gained through internships while continuing education is provided by specific medical device manufacturers and on-the-job training classes. BMET degree programs should be accredited by the ABET (Accreditation Board for Engineering and Technology) or the ATMAE (Association of Technology, Management, and Applied Engineering) both of whom offer specialized/programmatic accreditation for BMET programs. In addition, many 4 year graduates from accredited programs have studied or go on to study biomedical engineering, more specifically clinical engineering, if they wish to perform research and/or design (or MBA programs, if they wish to work on the business or administrative side). == Professional certification ==

Many BMETs pursue professional certification, such as satisfying certain education requirements and passing an examination from the International Certification Commission (ICC) and the Association for the Advancement of Medical Instrumentation (AAMI) to become a certified biomedical equipment technician (CBET), that is an accomplished generalized certification in the field covering many facets. There are four other certifications BMETs should obtain such as: certified radiology equipment specialists (CRES) from the American Society of Quality or a Biomedical Electronics Technician certification (BMD) from the Electronics Technician Association (ETA) after first obtaining the Associate Electronics Technician certification (CET). In most cases, carrying the title of "CBET" is highly encouraged, not mandatory but supported, and is respected within the technical community. == Employment ==

BMETs work in the hospital's biomedical or clinical engineering department, but can also find employment with a third-party independent service organization (ISO) or original equipment manufacturer (OEM). BMETs working for an OEM or ISO are often called field service engineers (FSE). FSE are more narrowly focused and specialized technicians who support service and sales. All military members entering the BMET career field receive comprehensive technical training. Prior to 1998, Army and Navy BMETs received training at the United States Army Equipment and Optical School (USAMEOS) at Fitzsimons Army Medical Center (FAMC) in Aurora, Colorado. In July 1995, a Base Realignment Closure Commission decided to close FAMC which caused the Army and Navy to merge with the Air Force to conduct training at the DoD Biomedical Equipment Technician Training School at Sheppard Air Force Base, Texas. This school has a partnership with Aims Community College where students receive 81 quarter credits (from the Community College of the Air Force) toward an associate of applied science (A.A.S.) Degree with an emphasis in Biomedical Electronic Technology. In addition to the credits acquired from DoD BMET Training School, a minimum of 24 credits must be completed through Aims Community College to receive a degree. As of August 4, 2010, the U. S. Military moved the BMET training to San Antonio, TX as a part of their new base realignment plan. All three forces remain in rigorous, tri-service training for 10 months prior to returning to their individual services. The training is held at Fort Sam Houston and is a part of the Medical Education and Training Campus (METC).The first METC BMET class started on August 4, 2010, and the last Sheppard class graduated on January 14, 2011. == Advancements and its Impact ==

As advancements continue to be made in the medical world technology continues to advance with it. Today we see much of the technology being implemented in hospitals for a variety of uses. Take for example electronic health records (EHRs) and their widespread use in the field today. Ever since the implementation of these electronic databases, EHRs have made it easier for physicians and medical professionals to gain access to the patient's records, and have made managing and storing the records safely. Other technologies such as nanohealth, brain implants, artificial organs, networked sensors, genomics, exoskeletons have come on the rise due to the advanced technology that continues to come in. Nanohealth especially, will have some hurdles to overcome in the coming future, seeing that it could become an ethical issue, one that would be hard to predict with new procedures. New technology has also allowed the introduction for minimally invasive surgeries, such as keyhole surgeries. As technology continues to get more and more miniaturized and cost production decreases, the healthcare field will continue to see minimally invasive surgeries on the rise. Living in a cost conscious world, personnel like such need to be implemented to help hospitals make sure that any new technological design or feature does not interfere negatively with the overall dynamic of the hospital. Change in this area is constant, and if abused could be the detriment not only to the hospital but more importantly to the patients who put their trust in the biomedical equipment that claim to ensure their recovery and aid. As resources for the medical field become far and few in between, getting ahead on technological advancements and spending more time on creating increasingly efficient technology to be used in hospitals and other healthcare practices. Focusing on the quality of these products as well as how fast they are being produced is equally as important -- cutting cost becomes useless if the robotics and devices cannot perform efficiently. While technology will obviously continue to advance it will become harder and harder as time goes on to ensure each new facet of biomedical technology satisfactorily achieves all that it claim to do, before upgrades and maintenance needs to be done. Due to human error, no piece of equipment designed will ever be one hundred percent efficient, thus where biomedical technicians come in to play, and in turn will forever be needed as technology advances ever onward. ==References==