Gun The BL 15-inch Mk I, designed by Vickers, Son, and Maxim in 1912, was an enlarged version of the successful
BL 13.5-inch Mk V naval gun. It was specifically intended to arm the new s as part of the British response to the new generation of Dreadnought battleships Germany was building, during the
naval arms race leading up to World War I. Due to the urgency of the times, the normally slow and cautious prototype and testing stages of a new gun's development were bypassed, and it was ordered straight from the drawing board. Despite its hurried development process, the gun met all expectations and was a competitive battleship main armament throughout both World Wars. According to an American report produced after World War II, the British 15 inch Mk I was the most reliable and accurate battleship main armament of the war, though other guns and mountings had superior individual features. The barrel was 42
calibres long (i.e., length of bore was 15 in x 42 = 630 in) and was referred to as "15 inch/42". Overall length of gun: 650.4 inches, Weight of gun, excluding breech mechanism: 97 tons 3cwt. Weight of breech mechanism: 2 tons 17cwt. Rifling: polygroove, 76 grooves, uniform right-hand twist of one turn in 30 calibres. This
wire-wound gun fired at a
muzzle velocity of (4 crh shell), 2,640 ft/s (6 crh shell) with supercharge. Weight of shell: 1,920 lbs (4 AP crh shell), 1,938 lbs (6 crh AP shell – 1937). Weight of charge: 428 lbs cordite, 490 lbs cordite for supercharge. The firing life of a 15-inch gun was approximately 335 full charge firings using standard charges, after which it had to be re-lined.
Mounting All shipboard mounts of the gun were in twin turrets. All mountings were designated Mk I, with an as-built maximum elevation of 20°, though some were subject to later modifications. HMS
Hood, however, had its guns in a unique mounting, designated Mk II. Incorporating experience from the
Battle of Jutland, the Mk II mounting had a maximum elevation of 30°, thus increasing the maximum range. In the 1930s a modification of the Mk I mounting, designated the Mk I (N), was introduced for use in those capital ships that were completely reconstructed. The Mk I (N) mounting also increased the maximum elevation from 20° to 30°. Maximum range in shipboard mountings was (30° elevation). == In service employment ==