The canal was built to bypass the shallow stretches of the Mersey at Fiddlers Ferry. It extended for , ending to the east of Runcorn Gap close to the centre of the township of Runcorn, and cost £48,000. At Latchford, it joined the Mersey at a lock which was located above Howley Weir. At its terminus a dock was built which became part of the
Port of Runcorn. The canal was built under powers embodied in the
Rivers Mercy and Irwell Navigation Act 1720 (
7 Geo. 1. St. 1. c. 15) which permitted new cuts to be made without the necessity of further recourse to Parliament. It opened in July 1804. It had its navigation rights removed by the '''''' (
SI 1976/1084). The canal as built had a locks at both ends, both of which dropped into the river. As it had no natural water supply, and water was lost every time a boat passed through a lock, a feeder was built from just above Paddington Lock on the Mersey and Irwell Navigation. The water was then carried across the Mersey in an aqueduct, which also acted as a footbridge, and followed the banks of the Mersey to arrive at Latchford Lock. It emptied into the canal just to the south of the lock. When the Black Bear Canal section was created, Twenty Steps Lock also rose from the ship canal, and so the feature was retained. Latchford Lock was usually known as Manor Lock after the construction of the ship canal, as the locks immediately above its junction with the Black Bear Canal were called Latchford Locks. In 2015 the Runcorn Locks Restoration Society launched its Unlock Runcorn campaign, which is dedicated to reopening the flight of locks in Runcorn's Old Town. The society believes that the increase in passing boat trade that would come from reopening the locks has the potential to bring economical, recreational and social benefits to people within the region. ==Route==