Boot (torture)

The Spanish boot was an iron casing for the leg and foot. Wood or iron wedges were hammered in between the casing and the victim's flesh. A similar device, commonly referred to as a shin crusher, squeezed the calf between two curved iron plates, studded with spikes, teeth, and knobs, to fracture the tibia and fibula. Primitive forerunners of the archetype can be found dating back as far as a thousand years. The first Scottish effort, also referred to as a buskin, made use of a vaguely boot-shaped rawhide garment that was soaked with water, drawn over the foot and lower leg, and bound in place with cords. The contraption was slowly heated over a gentle fire, drastically contracting the rawhide and squeezing the foot until the bones were dislocated, though there would not have been sufficient pressure to actually crush the bones of the foot. A more progressive variant, found in both the British Isles and France, consisted of a trio of upright wooden boards that splinted around and between the feet, fundamentally identical to the Chinese foot torture known as jiagun, and were tied in place by cords. Wedges were hammered between the boards and the feet to dislocate and crush the bones. Even ancient India saw the use of the kittee, a simple wooden machine, resembling a lemon press, within which the bare foot was slowly squeezed. A prototype hailing from Autun, France, consisted of high boots of spongy, porous leather that were drawn over the feet and legs. Boiling water was poured over the boots, eventually soaking through the leather and eating the flesh away from the entrapped limbs. Lastly, oversized boots of iron or copper (often soldered in place on the floor) received the prisoner's bare feet as he lay helplessly bound and gagged in a chair. The boots were slowly filled with boiling water or oil, or even molten lead, to consume the feet and legs. One variant—applied in Ireland to the martyr Dermot O'Hurley—consisted of lightweight metal boots that were filled with cool water and heated with the feet inside over a fire until the water boiled aggressively. ==Other implements for foot torture==

A similar implement, the foot press, consisted of a pair of horizontal iron plates slowly tightened around the bare foot by means of a crank mechanism, squeezing the foot with sufficient force to pulverize the bones. Although it was quite standard to line the lower plate with ribs to prevent the foot from popping out of the grip of the instrument as it became sweatier, a crueler variant of this device—typically encountered in Nuremberg, Germany—lined the upper plate with hundreds of sharp spikes. The instep borer was a putative medieval instrument of torture that externally resembled an iron boot into which the prisoner's bare foot was locked. Turning an external crank slowly advanced a serrated iron blade into the boot, boring a hole through the center of the instep. The only source that documents the device (Hirsch, A. E., ed., The Book of Torture and Executions, Toronto: Golden Books, 1944) indicates that it comes from Spain. This itself is questionable, since torture technology was much less sophisticated in Spain than in, e.g., Germany. Moreover, the very design and engineering of such an intricate device is not consonant with the Spaniards' preference for simple—but highly effective—tortures like foot roasting. A version of the boot from Venice, sometimes called the foot screw or toe breaker, connected the crank mechanism to a drill that slowly mutilated the foot by boring a hole through the center of the instep as the press was tightened. Further, a spike might be positioned over the big toe, which punctured the nail and savagely tortured the sensitive nail bed as the press was tightened. The "toe breaker" from Nuremberg was a wider instrument that accommodated both feet, side by side, simultaneously applying inexorable crushing pressure to all ten toes. Were the prisoner particularly stubborn or strong-willed, the press could be tightened until the plates met, so grinding the foot bones to powder. In The Big Book of Pain, Donnelly and Diehl present an ingenious and diabolical iron torture boot. The configurable device completely encloses the naked foot. The roomy toe box is filled with iron spikes, teeth, and burs. A vertical plate behind the prisoner's heel fits into a grooved track and can be forced forward by turning a wheel. The steadily increasing pressure first forces the toes against the spikes, mangling their flesh and crushing their bones. Under continued inexorable pressure, the bones of the instep eventually give way until the arch of the foot is shattered. The heel bone is sufficiently powerful to withstand the torture, although the heel is not generously provided with afferent pain nociceptors. Another variation occasionally seen (Scott, 1991) is a compartment beneath the sole of the prisoner's foot that can be filled with red-hot coals. ==References==