For the
London Underground, it has supplied shoe gear and
conductor rail systems, as well as
pantographs to the rail industry.
Pantographs Low height pantograph The Brecknell Willis Low Height pantograph is one of the four standard devices in use on British railway locomotives and multiple units and is a development of the standard Brecknell Willis High Speed pantograph. The Low Height pantograph is suitable for speeds up to . It has a small aerofoil mounted on the knuckle joint between the upper and lower arms.
High reach pantograph Although it had been used on a few rapid transit systems and on a
Blackpool tram, the first use of the high reach pantograph in the UK was the main lines was back in 1974 when a small number were fitted to some
Class 309s based at
Ilford EMU Depot. These continued to be used until around 1980 when they were all removed.
High speed pantograph The High speed pantograph was designed during the late 1970s and early 1980s as part of ongoing research into developing a pantograph capable of speeds over the 100 mph (160 km/h) limit of the
Stone Faiveley AMBR pantograph, which was the standard type in use at the time. The first locomotive to be fitted with the pantograph was
Class 86 No 86244, during February 1980. The pantograph is the mainstay within the UK railway system, where it is used on most overhead electric locomotives and EMUs. It has also been exported across the world, being used on the US high speed train
Acela and the
Eurostar Class 373. ==Gallery==