The Carbon Canyon Dam and Channel was authorized pursuant to two acts of
Congress. The first of these, the
Flood Control Act of 1936 (Public Law 738, 74th Congress, H.R. 8455, approved 22 June 1936), provided in part for the construction of reservoirs and related flood-control works for the protection of metropolitan Orange County, California. The second (Public Law 761, 75th Congress, approved 28 June 1938), amended the 1936 Act by providing for the acquisition by the
United States of land, easements, and right-of-way for dam and reservoir projects, channel improvements, and channel rectification for
flood control. The overall project was adopted in the Flood Control Act of 1936 on the basis of the 29 July 1935 report of the
Orange County Flood Control District (OCFCD) in connection with an application for a grant under the
Federal Emergency Relief Appropriation Act of 1935.
Planning and design Information generally pertaining to the dam was first presented in the OCFCD report mentioned above. In numerous subsequent conferences with the Los Angeles District (LAD) of the U.S. Army Corps of Engineers, the
Orange County Board of Supervisors and OCFCD discussed the plan of improvement. A comprehensive report on a plan for flood control in Orange County, California, was prepared by OCFCD in March 1955. This plan included Carbon Canyon Dam and Carbon Canyon Creek channel improvements. Design of the dam, and a length of improved channel immediately downstream of the dam, was performed by LAD, and presented in "General Design for Carbon Canyon Dam and Channel, Design Memorandum No. 2, Santa Ana River Basin (and Orange County)", dated August 1957, submitted 21 February 1958, and approved with comments 17 April 1958. This memorandum included design of the dam, outlet works,
spillway, and a concrete-lined channel in length (see para. 3-04a), as well as construction of drainage structures, relocation of two highways, modification of bridges, the removal of school buildings and residences, and the relocation of utilities.
Construction Construction of the Carbon Canyon Dam started in April 1959 under contract DA 04-353-CIVENG-59-144, with work completed and accepted by the
U.S. Army Corps of Engineers on 9 May 1961. Construction of the Corps project channel started in April 1960 and was completed in May 1961. The project was constructed by
Oberg Construction Company of
Northridge, California.
Related projects Plate 1-1 shows projects related to Carbon Canyon Dam. Carbon Canyon Channel. Carbon Canyon Channel (also called Carbon Canyon Creek) Canyon Dam partway to Miller Basin Complex, an OCEMA facility at the terminus of Carbon Canyon Channel. The remainder of Carbon Canyon Channel from the end of the LAD channel to Carbon Creek Channel has been partially improved, and is maintained by OCEMA. The Miller Basin Complex serves the functions of flood retarding basin, desilting basin, and stilling basin. At Miller Basin, Carbon Canyon Channel becomes Carbon Creek Channel. Miller Basin also serves to divide flow between Carbon Creek Channel (which flows to Coyote Creek and then the San Gabriel River) and Carbon Canyon Diversion Channel (which flows to the Santa Ana River). At Miller Basin, the channel system divides into two channels: Carbon Canyon Diversion Channel, which flows south to the Santa Ana River; and Carbon Creek Channel, which flows west into Coyote Creek and on to the San Gabriel River. The average gradient of Carbon Canyon Creek is about 117 feet per mile above the dam site. The average gradient of Carbon Canyon and Carbon Creek Channels is about 55 feet per mile from the dam to the juncture with Coyote Creek.
Telegraph Canyon Creek, the major tributary in the watershed above Carbon Canyon Dam, joins Carbon Canyon Creek within Carbon Canyon Reservoir. ==Downstream structures==