Carbon dioxide sensor

NDIR sensors are spectroscopic sensors to detect in a gaseous environment by its characteristic absorption. The key components are an infrared source, a light tube, an interference (wavelength) filter, and an infrared detector. The gas is pumped or diffuses into the light tube, and the electronics measure the absorption of the characteristic wavelength of light. NDIR sensors are most often used for measuring carbon dioxide. The best of these have sensitivities of 20–50 PPM. NDIR sensors are also used for dissolved for applications such as beverage carbonation, pharmaceutical fermentation and sequestration applications. In this case they are mated to an ATR (attenuated total reflection) optic and measure the gas in situ. New developments include using microelectromechanical systems (MEMS) IR sources to bring down the costs of this sensor and to create smaller devices (for example for use in air conditioning applications). Another method (Henry's Law) also can be used to measure the amount of dissolved in a liquid, if the amount of foreign gases is insignificant. == Photoacoustic sensors ==

can be measured using photoacoustic spectroscopy. Concentration of can be measured by subjecting a sample to pulses of electromagnetic energy (such as from a distributed feedback laser) that is tuned specifically to the absorption wavelength of . With each pulse of energy, the molecules within the sample will absorb and generate pressure waves via the photoacoustic effect. These pressure waves are then detected with an acoustic detector and converted to a usable reading through a computer or microprocessor. == Chemical sensors==

Chemical gas sensors with sensitive layers based on polymer- or heteropolysiloxane have the principal advantage of very low energy consumption, and that they can be reduced in size to fit into microelectronic-based systems. On the downside, short and long term drift effects, as well as a rather low overall lifetime, are major obstacles when compared with the NDIR measurement principle. Most sensors are fully calibrated prior to shipping from the factory. Over time, the zero point of the sensor needs to be calibrated to maintain the long term stability of the sensor. == Estimated sensor ==

For indoor environments such as offices or gyms where the principal source of is human respiration, rescaling some easier-to-measure quantities such as volatile organic compound (VOC) and hydrogen gas () concentrations provides a good-enough estimator of the real concentration for ventilation and occupancy purposes. Furthermore, inasmuch as ventilation is a factor in the spread of respiratory viruses, levels are a rough metric for COVID-19 risk; the worse the ventilation, the better for viruses and vice versa. Sensors for these substances can be made using cheap (~$20) Microelectromechanical systems (MEMS) metal oxide semiconductor (MOS) technology. The reading they generate is called estimated (e) or equivalent (eq). == Applications ==

• Examples: • Modified atmospheres • Indoor air quality • Stowaway detection • Cellar and gas stores • Marine vessels • Greenhouses • Landfill gas • Confined spaces • Aerospace • Healthcare • Horticulture • Transportation • Cryogenics • Ventilation management • Mining • Rebreathers (SCUBA) • Decaffeination • For indoor human occupancy counting • For HVAC applications, sensors can be used to monitor the quality of air and the tailored need for fresh air, respectively. Measuring levels indirectly determines how many people are in a room, and ventilation can be adjusted accordingly. See demand controlled ventilation (DCV). ==See also==