Body and
Queen Elizabeth in a
landau with footmen and a postilion, riding on the near wheel horse, controlling two horses. Canada, 1939 Carriages may be enclosed or open, depending on the type. The top cover for the body of a carriage is called the
head or
hood, and is sometimes flexible and designed to be folded back when desired. Such a folding top is called a
bellows top or
calash. A
hoopstick forms a light framing member for this kind of hood. The top, roof or second-story compartment of a coach was called an
imperial. A closed carriage may have side windows called
quarter lights (British) as well as windows in the doors, hence a "glass coach". On the forepart of an open carriage, a screen of wood or leather called a ''
intercepts water, mud or snow thrown up by the heels of the horses. The dashboard or carriage top sometimes has a projecting sidepiece called a wing
(British). A foot iron
or footplate'' may serve as a carriage step. The
drivers seat for a
coachman was in front of the carriage body, while
footmen stood on a footboard or sat on a seat behind the body. If either seat was raised on an iron frame and not built as part of the carriage body, it was given the name of
dickey-seat. Originally, the dickey was in the rear, but by the early 1900s the front seat was being called a dickey. A '''' was a place for luggage or other storage, and was sometimes built under a driver's or footman's seat, unlike the raised dickey seats. The earliest boots were projections wherein passengers put their feet, hence the name
boot. The modern terms for the seat upon which the driver sits are
box and '''', even when the carriage style is owner-driven rather than coachman-driven. Passenger seating in carriages include the following terminology and arrangements: • A
crosswise or
transverse seat-board is aligned from the left to right sides of the vehicle; passengers face forward or backwards. • A
longitudinal seat runs lengthwise, front to back. • The
phaeton method arranges crosswise seats for all passengers to face forward. An example is the
Surrey. • The
vis-à-vis method of seating has crosswise seats arranged for passengers in the forward seat to face those in the rear seat (face-to-face). Examples includes all
coaches, the
Landau, and the
Vis-à-vis. • A
dos-à-dos seating arrangement has crosswise seats for passengers to sit back-to-back. An example is the
Dogcart. • The
jaunting car method has two longitudinal seats placed back-to-back where the passengers face outward. An example is the
Jaunting car outside car. • The
wagonette method has two longitudinal seats placed to the outer edge of the vehicle's body so passengers face each other; entry is usually from the rear of the vehicle. Examples include the
Wagonette and the
Governess cart. A
holdback, consisting of an iron catch on the with a looped strap, enables a horse to back or hold back the vehicle. The end of the tongue of a carriage is suspended from the collars of the harness by a bar called the ''
. At the end of a trace, a loop called a cockeye'' attaches to the carriage. In some carriage types, the body is suspended by several leather straps called
thoroughbraces or
braces which serve as springs.
Undercarriage Beneath the carriage body is the
undergear or
undercarriage (or simply
carriage), consisting of the running gear and chassis. The wheels and axles, in distinction from the body, are the
running gear. The wheels revolve upon bearings or a spindle at the ends of a bar or beam called an
axle or
axletree. Most carriages have either one or two axles. On a four-wheeled vehicle, the forward part of the running gear, or
forecarriage, is arranged to permit the front axle to turn independently of the fixed rear axle. In some carriages a
dropped axle, bent twice at a right angle near the ends, allows for a low body with large wheels. A guard called a
dirtboard keeps dirt from the axle arm. Several structural members form parts of the chassis supporting the carriage body. The fore axletree and the splinter bar above it (supporting the springs) are united by a piece of wood or metal called a
futchel, which forms a socket for the pole that extends from the front axle. For strength and support, a rod called the
backstay may extend from either end of the rear axle to the reach, the pole or rod joining the hind axle to the forward bolster above the front axle. A skid called a
drag,
dragshoe,
shoe or
skidpan retards the motion of the wheels. A London patent of 1841 describes one such apparatus: "An iron-shod beam, slightly longer than the radius of the wheel, is hinged under the axle so that when it is released to strike the ground the forward momentum of the vehicle wedges it against the axle". The original feature of this modification was that instead of the usual practice of having to stop the carriage to retract the beam and so lose useful momentum the chain holding it in place is released (from the driver's position) so that it is allowed to rotate further in its backwards direction, releasing the axle. A system of "pendant-levers" and straps then allows the beam to return to its first position and be ready for further use. A catch or block called a
trigger may be used to hold a wheel on an incline. A horizontal wheel or segment of a wheel called a
fifth wheel sometimes forms an extended support to prevent the carriage from tipping; it consists of two parts rotating on each other about the kingbolt or perchbolt above the fore axle and beneath the body. A block of wood called a
headblock might be placed between the fifth wheel and the forward spring.
Wheels Historically, carriages had
wooden wheels. Modern sport carriages such as the
marathon carriage have metal wheels with solid rubber tires. Some lightweight carriages, such as horse show
sulkies, have wire "
bicycle spokes" and pneumatic tires. The basic parts of a wooden wheel are nave, spokes, felloes, and tyre (tire). The
nave is the central block and acts as the
hub.
Spokes are the pieces that fit into the nave, radiate outwards, and join into the felloes at the outer edge. The
felloe is made of several curved segments of wood, pieced together to make the outer circle of the wheel; sometimes spelled "felly". The
tyre or
tire is a protective strip that goes outside the felloe. The
rim is the outer edge of a wheel not counting the tyre, although some refer to the tyre itself as the rim.
Fittings, furnishings and appointments Originally, the word
fittings referred to metal elements such as bolts and brackets,
furnishings leaned more to leatherwork and upholstery or referred to metal buckles on harness, and
appointments were things brought to a carriage but not part of it, however all of these words have blended together over time and are often used interchangeably to mean the smaller components or parts of a carriage or equipment. All the shiny metal fittings on a vehicle should be one color, such as brass (yellow) or nickel (white), and should match the buckle color of any harness used with the vehicle. Early bodies of
horseless carriages were constructed by coachmakers using the same parts used in carriages and coaches, and some horse carriage terminology has survived in modern automobiles. • Upholstery: Seats might be
upholstered using leather, broadcloth, or plush fabrics. Elegant carriages might have upholstery-lined walls and ceilings, and button-tucked velvet seats trimmed with gold braid. • Carriage lamps: First used around 1700,
oil-powered lamps were used throughout the 1800s, though abandoned in favor of candles in the late 1800s, as oil was messy. Lamps are mounted on
lamp brackets and are removable for storage, daily wick trimming, or during daylight hours. • Boot: Any of several box-like parts of a carriage used for storage of small items. A boot may be found under the coachman's seat, under the passenger's seat, or behind the body of the carriage between the rear wheels. This led to the use of the term
boot in British English for the main storage compartment of an automobile. • Whip socket: Tubular holder for a whip usually mounted on the dashboard or to the right of the driver. • Whip: A long whip composed of a stiff stick (called the
stock), a long flexible thong, and a short lash. The length should be appropriate for the distance from the driver (who is also called a
Whip) to the shoulder of the forwardmost horse. With a small pony and cart a whip of overall length of 7 or 8 feet might be appropriate, whereas driving a team of four horses might require an overall length of 17 feet. Driving whips are not "cracked" to make noise, but are a communication aid used by touching the lash on or near the shoulder of the horse. •
Blankets: in cold weather, blankets for the driver and passengers and often
horse blankets as well may be carried in a boot. == Carriage terminology ==