Let
R be the
radius of the arc which forms part of the perimeter of the segment,
θ the
central angle subtending the arc in
radians,
c the
chord length,
s the
arc length,
h the
sagitta (
height) of the segment,
d the
apothem of the segment, and
a the
area of the segment. Usually, chord length and height are given or measured, and sometimes the arc length as part of the perimeter, and the unknowns are area and sometimes arc length. These can't be calculated simply from chord length and height, so two intermediate quantities, the radius and central angle are usually calculated first.
Radius and central angle The radius is: :R = \tfrac{h}{2}+\tfrac{c^2}{8h} The central angle is :\theta = 2\arcsin\tfrac{c}{2R}
Chord length and height The chord length and height can be back-computed from radius and central angle by: The chord length is :c = 2R\sin\tfrac{\theta}{2} = R\sqrt{2(1-\cos\theta)} :c = 2\sqrt{R^2 - (R - h)^2} = 2\sqrt{2Rh - h^2} The
sagitta is :h =R-\sqrt{R^2-\frac{c^2}{4}}= R(1-\cos\tfrac{\theta}{2})=R\left(1-\sqrt{\tfrac{1+\cos\theta}{2}}\right)=\frac{c}{2}\tan\frac{\theta}{4} The
apothem is : d = R - h = \sqrt{R^2-\frac{c^2}{4}} = R\cos\tfrac{\theta}{2}
Arc length and area The arc length, from the familiar geometry of a circle, is :s = {\theta}R The area a of the circular segment is equal to the area of the
circular sector minus the area of the triangular portion (using the double angle formula to get an equation in terms of \theta): :a = \tfrac{R^2}{2} \left(\theta - \sin \theta\right) In terms of and , :a = \tfrac{R^2}{2} \left(2\arcsin\tfrac{c}{2R} - \sin\left(2\arcsin\tfrac{c}{2R}\right)\right) = R^2\left(\arcsin\frac{c}{2R} - \frac{c}{2R}\sqrt{1-\left(\frac{c}{2R}\right)^2}\right) In terms of and , :a = R^2\arccos\left(1-\frac{h}{R}\right) - \left(R-h\right)\sqrt{h\left(2R - h\right)} In terms of and , :a = \left(\frac{c^2}{8h}+\frac{h}{2}\right)^2\arccos\left(\frac{c^2-4h^2}{c^2+4h^2}\right) - \frac{c}{16h}(c^2-4h^2) What can be stated is that as the central angle gets smaller (or alternately the radius gets larger), the area
a rapidly and asymptotically approaches \tfrac{2}{3}c\cdot h. If \theta \ll 1, a = \tfrac{2}{3}c\cdot h is a substantially good approximation. If c is held constant, and the radius is allowed to vary, then we have\frac{\partial a}{\partial s} = R As the central angle approaches π, the area of the segment is converging to the area of a
semicircle, \tfrac{\pi R^2}{2}, so a good approximation is a delta offset from the latter area: :a\approx \tfrac{\pi R^2}{2}-(R+\tfrac{c}{2})(R-h) for h>.75
R As an example, the area is one quarter the circle when
θ ~ 2.31 radians (132.3°) corresponding to a height of ~59.6% and a chord length of ~183% of the radius.
Other properties The perimeter
p is the arclength plus the chord length: :p=c+s=c+\theta R Proportion of the whole area of the circle: : \frac{a}{A}= \frac{\theta - \sin \theta}{2\pi} == Applications ==