house built in weatherboard in
New London, Connecticut, United States , New Zealand , Australia
Riven Clapboards were originally
riven radially by hand producing
triangular or "feather-edged" sections, attached thin side up and overlapped thick over thin to shed water.
Radially sawn Later, the boards were
radially sawn in a type of
sawmill called a
clapboard mill, producing
vertical-grain clapboards. The more commonly used boards in
New England are vertical-grain boards. Depending on the diameter of the log, cuts are made from deep along the full length of the log. Each time the log turns for the next cut, it is rotated until it has turned 360°. This gives the radially sawn clapboard its taper and true vertical grain.
Flat-sawn Flat-grain clapboards are cut tangent to the annual growth rings of the tree. As this technique was common in most parts of the British Isles, it was carried by immigrants to their colonies in the Americas and in Australia and New Zealand. Flat-sawn wood
cups more and does not hold paint as well as radially sawn wood.
Chamferboard Chamferboards are an Australian form of weatherboarding using tongue-and-groove joints to link the boards together to give a flatter external appearance than regular angled weatherboards.
Finger jointed Some modern clapboards are made up of shorter pieces of wood
finger jointed together with an adhesive. ==Wood species==