Coupled harmonic oscillator If two
waves are able to transmit
energy to each other, then these waves are said to be "coupled." This normally occurs when the waves share a common component. An example of this is two pendulums connected by a
spring. If the pendulums are identical, then their equations of motion are given by m\ddot{x} = -mg\frac{x}{l_1} - k(x-y) m\ddot{y} = -mg \frac{y}{l_2} + k(x-y) These equations represent the
simple harmonic motion of the pendulum with an added coupling factor of the spring. This behavior is also seen in certain molecules (such as
CO2 and H2O), wherein two of the atoms will vibrate around a central one in a similar manner.
Coupled LC circuits In
LC circuits, charge oscillates between the
capacitor and the
inductor and can therefore be modeled as a simple harmonic oscillator. When the
magnetic flux from one inductor is able to affect the
inductance of an inductor in an unconnected LC circuit, the circuits are said to be coupled. The coefficient of coupling k defines how closely the two circuits are coupled and is given by the equation \frac{M}{\sqrt{L_p L_s}} = k where M is the
mutual inductance of the circuits and Lp and Ls are the inductances of the primary and secondary circuits, respectively. If the flux lines of the primary inductor thread every line of the secondary one, then the coefficient of coupling is 1 and M = \sqrt{L_p L_s} In practice, however, there is often leakage, so most systems are not perfectly coupled. ==Chemistry==