spinner with
wheel and distaff (1873), shown with
spindle and distaff In Western Europe, there were two common forms of distaff, depending on the spinning method. The traditional form is a staff held under one's arm while using a
spindle – see the figure illustration. It is about long, held under the left arm, with the fibres drawn from it by the right hand. This version is the older of the two, as spindle-spinning predates spinning on a wheel. A distaff can also be mounted as an attachment to a
spinning wheel. On a wheel, it is placed next to the
bobbin, where it is in easy reach of the spinner. This version is shorter, but otherwise does not differ from the spindle version. By contrast, the traditional
Russian distaff used both with spinning wheels and with spindles, is L-shaped and consists of a horizontal board, known as the
dontse (), and a flat vertical piece, frequently oar-shaped, to the inner side of which the bundle of fibers was tied or pinned. The spinner sat on the
dontse, with the vertical piece of the distaff to their left, and drew the fibers out with the left hand. The distaff was often richly carved and painted and was an important element of Russian folk art. Recently, handspinners have begun using wrist distaffs to hold the fiber; these are made of flexible material, such as braided yarn, and can swing freely from the wrist. A wrist distaff generally consists of a loop with a tail, at the end of which is a tassel, often with beads on each strand. The spinner wraps the
roving or
tow around the tail and through the loop to keep it out of the way and to keep it from getting snagged. ==Dressing==