Don't-care term

Examples of don't-care terms are the binary values 1010 through 1111 (10 through 15 in decimal) for a function that takes a binary-coded decimal (BCD) value, because a BCD value never takes on such values (so called pseudo-tetrades); in the pictures, the circuit computing the lower left bar of a 7-segment display can be minimized to by an appropriate choice of circuit outputs for . Write-only registers, as frequently found in older hardware, are often a consequence of don't-care optimizations in the trade-off between functionality and the number of necessary logic gates. Don't-care states can also occur in line encoding schemes and communication protocols. == X value ==

"Don't care" may also refer to an unknown value in a multi-valued logic system, in which case it may also be called an X value or '''don't know'''. In the Verilog hardware description language such values are denoted by the letter "X". In the VHDL hardware description language such values are denoted (in the standard logic package) by the letter "X" (forced unknown) or the letter "W" (weak unknown). An X value does not exist in hardware. In simulation, an X value can result from two or more sources driving a signal simultaneously, or the stable output of a flip-flop not having been reached. In synthesized hardware, however, the actual value of such a signal will be either 0 or 1, but will not be determinable from the circuit's inputs. == Power-up states ==

Further considerations are needed for logic circuits that involve some feedback. That is, those circuits that depend on the previous output(s) of the circuit as well as its current external inputs. Such circuits can be represented by a state machine. It is sometimes possible that some states that are nominally can't-happen conditions can accidentally be generated during power-up of the circuit or else by random interference (like cosmic radiation, electrical noise or heat). This is also called forbidden input. In some cases, there is no combination of inputs that can exit the state machine into a normal operational state. The machine remains stuck in the power-up state or can be moved only between other can't-happen states in a walled garden of states. This is also called a hardware lockup or soft error. Such states, while nominally can't-happen, are not don't-care, and designers take steps either to ensure that they are really made can't-happen, or else if they do happen, that they create a ''don't-care alarm'' indicating an emergency state for error detection, or they are transitory and lead to a normal operational state. == See also ==