Electrocauterization is the process of destroying tissue (or cutting through soft tissue) using
heat conduction from a metal probe heated by electric current. The procedure stops bleeding from small vessels (larger vessels being
ligated). Electrocautery applies high frequency alternating current by a
unipolar or
bipolar method. It can be a continuous
waveform to cut tissue, or intermittent to coagulate tissue. The electrically produced heat in this process inherently can do numerous things to the tissue, depending on the waveform and power level, including cauterize, coagulate, cut, and dry (desiccate). Thus electrocautery, electrocoagulation, electrodesiccation, and electrocurettage are closely related and can co-occur in the same procedure when desired.
Electrodesiccation and curettage is a common procedure.
Unipolar In unipolar cauterization, the physician contacts the tissue with a single small electrode. The circuit's exit point is a large surface area, such as the buttocks, to prevent electrical burns. The amount of heat generated depends on the size of contact area, power setting or frequency of current, duration of application, and waveform. A constant waveform generates more heat than intermittent. The frequency used in cutting the tissue is higher than in coagulation mode.
Bipolar Bipolar electrocautery passes the current between two tips of a forceps-like tool. It has the advantage of not disturbing other electrical body rhythms (such as the heart) and also coagulates tissue by pressure. Lateral thermal injury is greater in unipolar than bipolar devices. Electrocauterization is preferable to chemical cauterization, because chemicals can leach into neighbouring tissue and cauterize outside of intended boundaries. Concern has also been raised regarding toxicity of the
surgical smoke electrocautery produces. This contains chemicals that, through inhalation, may harm patients or medical staff.
Ultrasonic coagulation and ablation systems are also available. ==Chemical cautery==