ETAP 21i

The ETAP 21i was built by ETAP Yachting in Belgium between 1997 and 2009, with 549 boats completed, but it is now out of production. ==Design==

The design is a recreational keelboat, built predominantly of glassfibre, with wood trim. It has a fractional sloop rig; a plumb stem; a vertical transom; twin transom-hung rudders controlled by a tiller and two fixed, shallow draft, tandem keels. The boat is normally fitted with a small outboard motor for docking and maneuvering. ==Variants==

;ETAP 21i :This model was and produced from 1997 to 2009. It has a length overall of , a waterline length of , displaces , carries of ballast and has a draft of with the standard twin tandem keels. It displaces , carries of ballast and has a draft of with the optional fin keel. ==Operational history==

The boat was at one time supported by a class club, the ETAP Owners Association. In a 2003 review in Yacht and Boat magazine, Barry Tranter wrote, "as the wind builds she heels initially, then the cast-iron bulb keel stiffens her up. And just when you think you may need to reach for the traveller to ease a bit of pressure you realise that the leeward rudder is biting deep into the water and keeps the boat tracking straight. This is the most memorable aspect of the Etap's behaviour; because the rudders are inclined to the vertical at rest (i.e. their lower tips are canted outwards) the leeward rudder is more or less vertical as the boat heels and it is also pushed deeper into the water as the leeward bilge submerges (and the windward rudder lifts clear.) As a result directional stability is exceptional, vital on short, light hulls, which can get out of sorts when tiller, mainsheet and the skipper's brain get out of phase with sharp gusts and lulls. Handling the Etap is simple ... This is a delightful and refreshing boat to sail..." ==See also==