FastPort

Transfer of data and files A USB FastPort-cable enables file and data transfer between a computer and a Sony Ericsson cellphone. Most models could act as a USB-storage-device, modem, phone and could load new firmware either with Sony Ericsson Update Service application, or with 3rd party software. FastPort was the interface to the PC to realize these functions. Charging the battery/powering the phone The port can charge the battery and power the phone while it is connected to, for example, a hands-free solution in a car. The FastPort became the only way to get external power to the phones. Chargers comes in several varieties, from 12/24 volt DC to use in cars, to 100-250 volt AC to use elsewhere. Some charger-models can only charge the phone (the cable is attached at the middle), in others all the connector pins through to the plug end, thus supporting data/signal transfer while the phone is being charged. Sound accessories and headsets The port also connects wired headsets or speakers, etc. ==Location==

Originally, the FastPort was placed on the bottom edge of the phone (when viewed from the front), for a while on the top edge, and finally on the left edge. These changes caused some accessories to become unusable, such as holders with charging options and docks. ==Layout==

The connector has 12 pins for electrical connections (both power and data), 2 double-sided "hooks" on the plug and matching holes in the phones connector for keeping the plug safely in place. One hook contains a small polarity key to prevent the connector being inserted upside down. The dimension of the connector on the phone is approximately . To help users identify the type of cable and see how to correctly insert the plug, a small symbol is placed on the side intended to be towards the front of the phone. Powerplugs display a small lightning bolt, headsets and hands-free-plugs show an old-fashioned headset, data-cables present a computer screen and music accessories reveal a note-sign. ==External links==