Australia All
Australian states require that firearms must be locked in steel
cabinets or safes, although wooden safes "deemed not easily penetrable" are allowed for Category A and B weapons in all states, apart from
Western Australia and
Victoria. In most states, the law states that the ammunition (and
bolt if readily removed), must be stored either in a separate safe or in a separately locked section of the safe. It is a legal requirement that the safe is
fastened to the wall or floor (with exceptions in most states for safes with a mass of greater than ). In addition, shooters in
Western Australia must have double locks on their safes if the swinging edge of the door is greater than and less than , and additional locks are required for safes with a swinging edge greater than 1500 mm. Police may visit and inspect the storage facility before issuing a
gun license, and will make random checks to ensure that legislation is being complied with. The
Sporting Shooters Association of Australia endorses this policy with its "Secure your gun, Secure your sport" campaign to increase compliance of
firearm safety and prevent
theft. Requirements vary when transporting firearms in vehicles in different states. Most require that the gun is hidden from view, and locked so that it is not easily reached by an unauthorised person. Firearms must be unloaded and the ammunition transported in another section of the car.
Canada A gun safe is a vault, cabinet, container or room that is difficult to break into. A sheet metal commercial gun safe, or other locked metal container for the preservation of valuables fits the description of “safe” in Black’s Law Dictionary. Safe storage conditions increase in severity from non-restricted class to restricted class and prohibited classes. The firearm must be either trigger locked, or have the bolt removed, or must be stored in a secure locked container, receptacle or room. A restricted or prohibited firearm must be inoperable by means of a keyed trigger locking device. A full-automatic firearm must be further disassembled to remove the bolt or bolt carrier, which must be physically separated from the rest of the pieces.
Ireland Any person applying for or renewing their gun licence in Ireland must have a gun safe installed in their home. This was made law under the Firearms (Secure Accommodation) Regulations 2009. Safes must be tested to the British Standard BS7558. Additional requirements including monitored alarms are necessary for those with more than 3 guns.
United Kingdom Many gun safes sold in the UK are tested to BS BS7558/92, the British Standard for gun safes. The British Home Office recommends that new cabinets should conform to this standard. Legacy cabinets already in use are usually accepted, at the opinion of the visiting firearms officer, when the license applicant has their home visit and security inspection. Glass fronted cabinets are legal in the U.K, provided the security glazing comply with BS5544 requirements and have no more weak spots than a full steel cabinet. If citizens do not own a gun safe, according to 'Secure Storage', it is acceptable to remove the firing mechanism from a single firearm or shotgun and store the mechanism in a secure container. It is then required that you lock away the rest of the now-non-functional firearm, or secure it with a "gun cable lock". Additional security, such as CCTV and/or alarms, may be required in higher risk areas, and also for High Muzzle Energy rifles (over 13,600 joules at the muzzle of the weapon). A gun room is also acceptable. For full details of what is acceptable, refer to the latest version of the
United States Some gun safes in the United States are tested by
Underwriters Laboratories (UL). The
least rigorous UL certification for safes is specified in the standard UL 1037 as Residential Security Container (RSC). RSC certification requires that the safe resist for five minutes expert attacks employing tools including screwdrivers, adjustable wrenches, pry bars, punches, chisels and hammers no heavier than 3 lb. Many gun safe manufacturers state that their gun safe is "DOJ approved". The state of
California Department of Justice (DOJ) has required that any gun safe sold in California should be approved by the Regulatory Gun Safe Standards. This DOJ standard has now become a common rating for the classification of gun safes. However, in 2012, a report appeared in
Forbes written by the investigative attorney and
physical security specialist
Marc Weber Tobias, presenting the results of his investigation into the quality of the security provided by eleven different models among three leading brands of gun safes sold in the U.S. through many retail outlets. Eight models from one of the brands are said to conform to the DOJ standard. Tobias reported that he and his colleagues found that all eleven models could be opened with one of a variety of simple implements and techniques, including bouncing and rapping, or insertion of paperclips, wires, drinking straws, screwdrivers, or brass strips that can be purchased from a
hardware store. Four of the models were unlocked by a three-year-old child. (It was a fatality resulting from such an occurrence that led to the investigation.) When Tobias reported their findings to the manufacturers and retailers of the "safes", no useful dialog or corrective action resulted. Tobias concluded that the DOJ "Standards are woefully inadequate and do not address any of the issues that we found in any of the gun safes that we tested. If the Standards do not cover a method of entry, then they are meaningless." Fireproof gun safes have an
UL classification, and depending on the build of the gun safe, the inside must not get warmer than a certain temperature during a certain period of time. A common rating for gun safes is "350-1 hour" or "350-2 hour", which means that when the safe is in a fire, the inside will not get warmer than 350 degrees Fahrenheit for 1 or 2 hours. It has been noted that fireproof safes may be insecure against unauthorized entry. ==Potential risk==