Solid Hardwood flooring Solid
hardwood floors are made of
planks milled from a single piece of timber. Solid hardwood floors were originally used for structural purposes, being installed perpendicular to the wooden support beams of a building known as
joists or bearers. With the increased use of concrete as a
subfloor in some parts of the world, engineered wood flooring has gained some popularity. However, solid wood floors are still common and popular, but are commonly more expensive in the United States and considered higher end. Solid wood floors have a thicker wear surface and can be sanded and finished more times than an engineered wood floor. It is not uncommon for homes in New England, Eastern Canada, USA, and Europe to have the original solid wood floor still in use today.
Solid wood manufacturing Solid wood flooring is milled from a single piece of timber that is
kiln or air dried before sawing. Depending on the desired look of the floor, the timber can be cut in three ways: flat-sawn, quarter-sawn, and rift-sawn. The timber is cut to the desired dimensions and either packed unfinished for a site-finished installation or finished at the factory. The moisture content at time of manufacturing is carefully controlled to ensure the product does not warp during transport and storage. A number of proprietary features for solid wood floors are available. Many solid woods come with grooves cut into the back of the wood that run the length of each plank, often called 'absorption strips,' that are intended to reduce cupping. Solid wood floors are mostly manufactured thick with a tongue-and-groove for installation.
Other wood manufacturing styles Rotary-peel parquet floor with two-strip wenge border This process involves treating the wood by
boiling the log in water. After preparation, the wood is peeled by a
blade starting from the outside of the log and working toward the center, thus creating a wood veneer. The veneer is then pressed flat with high pressure. This style of manufacturing tends to have problems with the wood cupping or curling back to its original shape.
Rotary-peeled engineered hardwoods tend to have a
plywood appearance in the grain.
Sliced-peel This process begins with the same treatment process that the rotary peel method uses. However, instead of being sliced in a rotary fashion, with this technique the wood is sliced from the log in much the same manner that lumber is sawn from a log – straight through. The veneers do not go through the same manufacturing process as rotary peeled veneers. Engineered hardwood produced this way tends to have fewer problems with "face checking", and also does not have the same plywood appearance in the grain.
Laminate and
vinyl floors are often confused with engineered wood floors, but are not. Laminate flooring uses an image of wood on its surface, while vinyl flooring is plastic formed to look like wood. The several different categories of engineered wood flooring include: • All-timber-wood floors made from multiple layers of sawn wood. Most engineered wood flooring is in this category, and does not use rotary-peeled veneer, composite wood (such as HDF), or plastic in their construction. •
Veneer floors use a thin layer of wood over a core that is commonly a composite wood product. • Acrylic-impregnated wood flooring uses a layer of wood that is impregnated with liquid acrylic then hardened using a proprietary process. • Birch plywood is commonly used as the substrate in engineered flooring due to its strength, durability, and waterproof properties. It is composed of several thin layers of birch veneer core glued together. It is well-suited for commercial vehicle flooring and trailer decking for its flexibility and ability to endure heavy foot traffic. == Comparison of solid wood with engineered wood ==