Honda J engine

The J25A was used only in the Japanese domestic Inspire/Saber models. The J25A displaced . Its bore and stroke was . The J25A used a 10.5:1 compression ratio and was a SOHC VTEC design. Output was at 6200 rpm and of torque at 4600 rpm. It had a variable intake manifold to optimize torque output across varying engine speeds and engine response. J25A • 1998–2003 Honda Inspire • 1999 Honda Saber ==J30==

The J30A displaces and is a SOHC VTEC design. Its bore and stroke is . Output for the J30A1 was initially and of torque, later increased to and of torque. The J30A4 pushed output to and using a three-way VTEC system, a higher (10.0:1) compression ratio and a novel exhaust manifold cast as one piece with the cylinder head. It weighs nearly less and is an inch shorter than J30A1. This version was on the Ward's 10 Best Engines list for 2003 and 2004. The IMA hybrid version was on the list for 2005. In 2006 Honda created the J30A5 to mark the 30th anniversary of the Accord. It boosted output to (SAE Net 08/04) and (SAE Net 08/04) of torque. According to Honda, horsepower gains were achieved with improvements to the airflow of the intake and exhaust system. J30A – VCM • 2003–2007 Honda Inspire (JDM, marked as J30A-60 250ps) • 2004–2013 Honda Elysion (JDM, RR3/RR4) • Displacement: • Bore and stroke: • Power: at 6,000 rpm • Torque: at 5,000 rpm • IMRC (Intake Manifold Resonance Control) for increased torque at low rpm • Redline: 6,800 rpm • Compression: 10.5:1 • Valve train : SOHC i-VTEC (belt-driven, intake2, exhaust2) • Variable Cylinder Management (VCM) : (3 and 6 cylinder operation) • Induction: Naturally Aspirated • Fuel Delivery:Multi-point fuel injection (Honda PGM-FI) • Emissions control systems : Catalytic converter,EGR,PCV J30A1 • 1996–1999 Acura 3.0CL • 1998–2002 Honda Accord V6 • 1999–2003 Honda Avancier J30A3 • 1998–2002 Honda Accord V6 • 1997–2003 Honda Odyssey (Prestige & Absolute models) J30A4 • 2003–2007 Honda Accord V6 (USDM) • Displacement: • Bore and stroke: • Power: at 5,500 rpm (Thai Domestic Market 220hp): Drive by wire for reducing gas emissions) • Torque: at 5,000 rpm • Compression: 10.0:1 • Induction: Naturally Aspirated • Fuel Delivery: Multi-point fuel injection (PGM-FI) • Valve Train: 24-Valve SOHC VTEC J30A5 • 2005–2007 Honda Accord V6 • 2013–2016 Honda Accord (China only, with VCM ,261ps) • Displacement: • Bore and stroke: • Power: at 6244 rpm • Torque: at 5000 rpm • Redline: 6,800 rpm • Fuel cut: 7,000rpm • Compression: 10.0:1 • Valve Train: 24-Valve SOHC i-VTEC J30AC (Turbo) • 2021–2025 Acura TLX Type-S • 2022+ Acura MDX Type-S • Displacement: • Bore and stroke: • Power: at 5500 rpm • Torque: at 1400–5000 rpm • Compression: 9.8:1 • Valve Train: 24-Valve DOHC with VTC J30Y1 • 2013–2018 Acura RDX (China) • 2017–2020 Acura MDX (Sport Hybrid) • Displacement: • Bore and stroke: • Power (engine only): 257 hp at 6300 rpm • Power (combined): 321 hp at 6300 rpm • Torque (combined): 289 lb⋅ft (392 N⋅m) at 5000 rpm • Valve train: 24-Valve SOHC • Induction/Fuel Delivery: Naturally Aspirated – Direct Injection JNA1 • 2005–2007 Honda Accord Hybrid • Displacement: • Bore and stroke: • Power: at 5400 rpm + IMA hybrid = • Torque: at 4500 rpm • Compression: 10.5:1 • Valve Train: 24-Valve SOHC i-VTEC ==J32==

The J32A displaces and is a SOHC VTEC design. Its bore and stroke is . Output was at 5600 rpm and at 4700 rpm for the J32A1, with the J32A2 raising output to at 6200 rpm and at 3500–5500 rpm. A more aggressive camshaft, more free flowing intake/exhaust, and a 2-stage intake manifold produced a increase over the J32A1. The J32A3's output in the 2004/2005 TL is . Due to changes in SAE testing methods, 2006–2008 model years have a reduced output rating of , despite being mechanically identical. The J32A3 includes a one-piece exhaust manifold cast with the cylinder head, first introduced on the J30A4. J32A1 • 1999–2003 Acura TL • 2001–2003 Acura CL • 1998–2003 Honda Inspire J32A2 • 2001–2003 Acura CL Type-S • Bore and Stroke: 89mm x 86mm • 10.5:1 Compression • 2002–2003 Acura TL Type-S • 2002–2003 Honda Inspire Type-S J32A3 • 2004–2008 Acura TL • 3.2-liter SOHC V-6 aluminum alloy engine • Bore Stroke (All J32's) : 89mm x 86mm (3.5in x 3.386 in) • 11:1 Compression (High Compression Piston Domes) • (2004–2005) at 6200 rpm and of torque at 5000 rpm • (2006–2008) Readout changed to SAE standards, Revised to at 6200 rpm and of torque at 5000 rpm - *No change was made to engine, only SAE readout which changed the HP numbers • 2007–2008 (With revised bellhousing) Acura TL • Variable Valve Timing and Lift Electronic Control (VTEC) • Dual-stage induction system • Cold-air intake system • Computer-controlled Programmed Fuel Injection (PGM-FI) • Direct ignition system • Unique exhaust manifolds that are cast directly into the head • High flow close-coupled catalytic converters • VTEC engagement: 4,700 rpm ==J35==

J35A The J35A is a SOHC VTEC design. Its weight is running. The Honda Marine BF200-series marine engine shares its internals with the J35A. J35A1 • 1999–2001 Honda Odyssey • Displacement: • Bore and stroke: • Power: Premium – Regular - • Torque: Premium – Regular – • Fuel Delivery: Programmed Fuel Injection (PGM-FI) J35A3 • 2001–2002 Acura MDX • Displacement: • Bore and stroke: • Power: at 5800 rpm • Torque: at 4500 rpm • Fuel Delivery: Programmed Fuel Injection (PGM-FI) J35A4 • 2002–2004 Honda Odyssey • 2003–2004 Honda Pilot • Displacement: • Bore and stroke: • Power: at 5400 rpm • Torque: at 4500 rpm • Compression: 10.0:1 • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • Valve Train: 24-valve SOHC VTEC J35A5 • 2003–2006 Acura MDX • Displacement: • Bore and stroke: • Power: at 5800 rpm • Torque: at 3500 rpm • Compression: 10.0:1 • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • Valve Train: 24-valve SOHC VTEC J35A6 • 2005–2006 Honda Odyssey (LX, EX) • 2007–2010 Honda Odyssey (LX, EX) (with revised bellhousing) • 2005 Honda Pilot • Displacement: • Bore and stroke: • Power: at 5600 rpm • Torque: at 4500 rpm • Compression: 10.0:1 • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • Valve Train: 24-valve SOHC VTEC • VTEC engagement: 4,600 rpm J35A7 – VCM Variable Cylinder Management (VCM) Piston Oil Jets • 2005–2006 Honda Odyssey (EX-L, Touring) • 2007–2010 Honda Odyssey (EX-L, Touring) (with revised bellhousing) • Displacement: • Bore and stroke: • Power: at 5600 rpm • Torque: at 4500 rpm • Compression: 10.0:1 • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • Valve Train: 24-valve SOHC i-VTEC* • VCM (Gen 1): 3 or 6 cylinder mode (2005–2007 Honda Odyssey (EX-L, Touring)) • VCM (Gen 2): 3, 4 or 6 cylinder mode (2008–2010 Honda Odyssey (EX-L, Touring)) • VTEC engagement: 4,600 rpm • 2007–2008 Acura TL Type-S • Displacement: • Bore and stroke: • Power: at 6200 rpm • Torque: at 5000 rpm • Displacement: • Bore and stroke: • Power: at 5750 rpm • Torque: at 4500 rpm • Compression: 10.0:1 • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • VTEC engagement: 4,400 rpm J35S J35S1 • 2004–2007 Saturn Vue also referred to as GM L66 • Displacement: • Bore and stroke: • Power: at 5800 rpm • Torque: at 4500 rpm • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • Has revised bell housing Honda round style along with revised cylinder heads with single exit port • Renamed J35A5 from the 2003–2006 Acura MDX with different cam profiles; uses the h5 awd/fwd automatic transmission (and transfer case if applicable) along with the same wire harness and ECU J35Z The J35Z engines use a die-cast aluminum block with cast-iron cylinder sleeves. J35Z1 – VCM • 2006–2008 Honda Pilot (front-wheel drive only) • Displacement: • Bore and stroke: • Compression: 10.5:1 • Power: at 5,750 rpm • Torque: at 4,500 rpm • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • Valve Train: 24-valve SOHC i-VTEC • VCM (Gen 1): 3 or 6 cylinder mode J35Z2 – VCM • 2008–2012 Honda Accord V6 (5AT) • 2010–2012 Honda Accord Crosstour • 2013–2018 Acura RDX • 2007–2012 Honda Inspire (Japanese market, marked as J35A-80 280ps) • Displacement: • Bore and stroke: • Compression: 10.5:1 • Power: at 6,200 rpm (2008–2012 Honda Accord V6 (5AT) • Power: at 6,200 rpm (2010–2012 Honda Accord Crosstour) • Power: at 6,200 rpm (2013–2015 Acura RDX) • Power: at 6,200 rpm) (2016–2018 Acura RDX) • Torque: at 5,000 rpm (2008–2012 Honda Accord V6 (5AT) • Torque: at 5,000 rpm (2010–2012 Honda Accord Crosstour) • Torque: at 5,100 rpm) (2013–2015 Acura RDX) • Torque: at 4,900 rpm) (2016–2018 Acura RDX) • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • Valve Train: 24-valve SOHC i-VTEC • VCM (Gen 2): 3, 4 or 6 cylinder mode • VCM (Gen 3): 3 or 6 cylinder mode (only 2016–2018 Acura RDX) • Redline: 6,900 rpm J35Z3 • 2008–2012 Honda Accord V6 (6MT) • Displacement: • Bore and stroke: • Compression: 10.5:1 • Power: at 6,200 rpm • Torque: at 5,000 rpm • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • Valve Train: 24-valve SOHC VTEC • VTEC engagement: 5,000 rpm J35Z4 – VCM • 2009–2015 Honda Pilot • Displacement: • Bore and stroke: • Compression: 10.5:1 • Power: at 5,700 rpm • Torque: at 4,800 rpm • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • Valve Train: 24-valve SOHC i-VTEC • VCM (Gen 2): 3, 4 or 6 cylinder mode J35Z5 • 2009–2014 Honda Ridgeline • Displacement: • Bore and stroke: • Compression: 10.0:1 • Power: at 5,700 rpm • Torque: at 4,300 rpm • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • Valve Train: 24-valve SOHC VTEC J35Z6 • 2010–2014 Acura TSX V6 • 2009–2014 Acura TL (non SH-AWD) • Displacement: • Bore and stroke: • Compression: 11.2:1 • Power: at 6,200 rpm • Torque: at 5,000 rpm • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • Valve Train: 24-valve SOHC VTEC J35Z8 – VCM • 2011–2017 Honda Odyssey (North America) • Displacement: • Bore and stroke: • Compression: 10.5:1 • Power: at 5,700 rpm) • Torque: at 4,800 rpm • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • Valve Train: 24-valve SOHC i-VTEC • VCM (Gen 2): 3, 4 or 6 cylinder mode J35Y J35Y1 – VCM • 2013–2017 Honda Accord V6 (6AT) • 2013–2015 Honda Crosstour • Displacement: • Bore and stroke: • Compression: 10.5:1 • Power: at 6,200 rpm • Torque: at 4,900 rpm • Fuel Delivery: Programmed Fuel Injection (PGM-FI) (Earth Dreams™ Technology) • Valve Train: 24-valve SOHC i-VTEC (VTEC on intake valves only) • VCM (Gen 3): 3 or 6 cylinder mode • Redline: 6,800 rpm • Fuel Cut off: 7,200 rpm • VTEC engagement: 5,150 rpm J35Y2 • 2013–2017 Honda Accord V6 (6MT) • Displacement: • Bore and stroke: • Compression: 10.0:1 • Power: at 6,200 rpm • Torque: at 4,900 rpm • Fuel Delivery: Programmed Fuel Injection (PGM-FI) (Earth Dreams™ Technology) • Valve Train: 24-valve SOHC VTEC (VTEC on intake valves only) • Redline: 6,800 rpm • Fuel cutoff: 7,200 rpm • VTEC engagement: 4,900 rpm J35Y5 – VCM • 2014–present Acura MDX • Displacement: • Bore and stroke: • Compression: 11.5:1 • Power: at 6,200 rpm • Torque: at 4,500 rpm • Fuel Delivery: Direct Injection (Earth Dreams™ Technology) • Valve Train: 24-valve SOHC i-VTEC (VTEC on intake valves only) • VCM (Gen 3): 3 or 6 cylinder mode • Redline: 6,800 rpm • Fuel cutoff: 7,200 rpm • VTEC engagement: 4,950 rpm J35Y6 - VCM • 2015–2020 Acura TLX • 2016–2022 Honda Pilot • 2017–present Honda Ridgeline • 2018–present Honda Odyssey (North America) • 2019–2025 Honda Passport • Displacement: • Bore and stroke: • Compression: 11.5:1 • Power: at 6,200 rpm (2015–2020 Acura TLX) • Power: at 6,000 rpm • Torque: at 4,500 rpm (2015–2020 Acura TLX) • Torque: at 4,700 rpm • Fuel Delivery: Direct Injection (Earth Dreams™ Technology) • Valve Train: 24-valve SOHC i-VTEC (VTEC intake valves only) • VCM (Gen 3): 3 or 6 cylinder mode • Redline: 6,800 rpm • Fuel cutoff: 7,200 rpm • VTEC engagement: 5,000 rpm (2015–2020 Acura TLX) • VTEC engagement: 5,350 rpm J35Y8 – VCM • 2023–present Honda Pilot • 2026–present Honda Passport • Displacement: • Bore and stroke: 89 mm × 93 mm (3.50 in × 3.66 in) • Compression: 11.5:1 • Power: at 6,100 rpm • Torque: at 5,000 rpm • Fuel Delivery: Direct Injection (Earth Dreams™ Technology) • Valve Train: 24-valve DOHC with VTC (Variable Timing Control) • VCM (Gen 4): 3 or 6 cylinder mode ==J37==

The J37 uses a die-cast aluminum block with aluminum cylinder liners. Primarily due to the cylinder liners being made from aluminum instead of cast-iron the engine weighs less than the J35Z engines. The intake manifold is made from a cast magnesium alloy. J37A1 • 2007–2013 Acura MDX • Displacement: • Bore and stroke: • Compression: 11.0:1 (2007–2009); 11.2:1 (2010–2013) • Power; torque: at 6,000 rpm; at 5,000 rpm (2007–2009) • Power; torque: at 6,300 rpm; at 4,500 rpm (2010–2013) • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • Valve Train: 24-valve SOHC VTEC • VTEC engagement (2007–2009): 4,500 rpm • VTEC engagement (2010–2013): 4,800 rpm J37A2 • 2009–2012 Acura RL • Displacement: • Bore and stroke: • Compression: 11.2:1 • Power; torque: at 6,300 rpm; at 5,000 rpm • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • Valve Train: 24-valve SOHC VTEC • VTEC engagement: 4,900 rpm J37A4 • 2008–2012 Honda Legend • 2009–2014 Acura TL SH-AWD • Displacement: • Bore and stroke: • Compression: 11.2:1 • Power; torque: at 6,300 rpm; at 5,000 rpm • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • Valve Train: 24-valve SOHC VTEC • VTEC engagement: 4,700 rpm J37A5 • 2010–2013 Acura ZDX • Displacement: • Bore and stroke: • Compression: 11.2:1 • Power; torque: at 6,300 rpm; at 4,500 rpm • Fuel Delivery: Programmed Fuel Injection (PGM-FI) • Valve Train: 24-valve SOHC VTEC (VTEC intake valves only) • VTEC engagement: 4,800 rpm ==See also==