HP-150

HP-150 was a compact, powerful and innovative computer made by Hewlett-Packard and introduced in Las Vegas at Comdex fall trade show on November 28,1983. It was based on the Intel 8088 CPU and was one of the world's earliest commercialized touch screen computers. Like other "workalike" IBM PC clones of the time, despite running customized MS-DOS versions 2.01, 2.11 and 3.20, the machine was not IBM PC DOS compatible. Its 8088 CPU, rated at 8 MHz, was faster than the 4.77 MHz CPUs used by the IBM PC of that period. Using add-on cards, main memory could be increased from 256 KB to 640 KB. However, its mainboard did not have a slot for the optional Intel 8087 math coprocessor due to space constraints. An HP-150 with an optional hard disk was called HP Touchscreen MAX.

Hardware

Display Display resolutions: • Text: 80 columns × 27 lines (720 × 378 pixels) • Character size: 7 × 10 pixels • Character cell size: 9 × 14 pixels • Inherent HP Terminal emulation equivalent to HP 2623 Graphics Terminal • Bit-map: 512 × 390 pixels • Separate plane for text and graphics • Monitor sensor grid: 40 (h) × 24 (v) HP-150's touch screen sensor grid is quite coarse. Its resolution is only two characters wide. Used mainly for rough cursor positioning and function key control, it could not be used to draw pictures. Processor unit • Optional internal thermal printer HP 2647A (fax roll) • Communication ports: • Two RS-232 ports (one of them supported RS-422) • HP-IB (IEEE-488) • HP-HIL (standard on HP-150 II, but an optional add-on card on HP-150) Storage • Supported HP-IB attached storage: ==Reception==

Reception

BYTE in November 1984 called HP-150 "an extremely flexible machine", but "difficult to program". ==Software==

Software

The HP-150 hosted some of the earliest PC games, including the classic role-playing game Temple of Apshai and the InfoCom games Zork-1, Witness and Enchanter. As a business machine, Lotus 1-2-3, WordStar, DBase and Multiplan were available. ==Successors==

Successors

The two-CPU HP-120 (aka HP 45600A) Z80 CP/M machine also used the 9121 drives. HP-150 II (aka HP 45849A) replaced HP-150 in 1984. While still called HP Touchscreen II, the touchscreen was no longer standard, but rather a rarely adopted option. The optional touchscreen bezel was superior to the original bezel, in that the emitters and detectors were now located behind a solid infrared-transparent plastic; thus removing the need to regularly clean the holes found in the original model. HP-150 II had the same footprint as HP-150, but came in a larger housing to accommodate its 12-inch screen, but could no longer accommodate an internal printer. HP-150 II had four expansion slots available (as opposed to two), and could accommodate an optional 8087 co-processor board. There were some minor compatibility problems between HP-150 and HP-150 II in the video subsystem. In 1985, HP introduced the Vectra, which InfoWorld stated was the company "responding to demands from its customers for full IBM PC compatibility". HP repositioned HP-150 as a workstation for the HP 3000 minicomputer. ==See also==

Source: Wikipedia ↗

tickerdossier.com tickerdossier.substack.com