The history of WDM-2 begins in the early 1960s with the stated aim of the
Indian Railways to remove
steam locomotives from Indian Rails after recommendation of Karnail Singh Fuel Committee. Therefore, required building a large number of
Co-Co diesel locomotives producing at least 2,600 hp (1,900 kW) with
road switcher cabs to achieve this aim. Thus Indian Railways began looking at various
diesel–electric designs. Initially, the Indian railways invited tenders to build locomotives to the new specification. The following responses were received: • ALCO submitted their model (RSD29 / DL560C) with 2,600 hp, 16-cylinder, 4-stroke turbo-supercharged engine with Co-Co bogies. •
General Motors Electro-Motive Division (EMD) submitted their
G16, turbocharged to become the GT16. They had Co-Co bogies with 16-cylinder 2-stroke turbo-supercharged engines. Each company submitted their prototypes and Indian Railways designated these prototypes as the WDM-2 class and
WDM-4 class respectively. Technologically the General Motors WDM-4 was superior to ALCO WDM-2, but Indian Railways required a transfer of technology agreement that would allow these locomotives to be indigenously manufactured in India. Since General Motors did not agree to the transfer of technology agreement, the ALCO prototype was selected for production. However, even before the arrival of WDM-2, another type of diesel locomotive was imported from ALCO in 1957. This locomotive was classified as
WDM-1. However WDM-1s were not selected for mass production because of having only one forward cab at one end which needed a lot of turntables.
Production history The first few prototype WDM-2 locomotives were imported, with locomotive number 18040 being assigned the first WDM-2 of India. The need for a large number of locomotives quickly was deemed paramount. After
Banaras Locomotive Works (DLW) completed construction of its factory in Varanasi, production of the locomotives began in India. The first 12 locomotives were built using kits imported from ALCO (order no. D3389) in the United States. The first diesel loco assembled in DLW was locomotive number 18233 and the first fully built WDM-2 from DLW was 18299. After that DLW started manufacturing WDM-2 locomotives from their own components. Since then over 2,800 locomotives have been manufactured with 16887 being the last locomotive in the series. Although ALCO went bankrupt, DLW Varanasi successfully adapted the technology and produced many upgraded versions which were exported to many
Broad Gauge countries. Later a number of modifications were made and a few sub-classes were created. These include WDM-2A, WDM-2B and WDM-3A (formerly WDM-2C). A few WDM-2 locomotives had been rebuilt by
Diesel Loco Modernisation Works (DLMW) in Patiala, Punjab. These are fitted with
DBRs produced by Daulat Ram Engineering.
Service history The whole batch of WDM-2 imports went all to the Diesel locomotive shed at
Katni (KTE). Locomotive number 18040 was first loco in the series, but 18042 was the first WDM-2 unit to be commissioned. By 1967 the first
express trains were being hauled by the WDM-2 instead of steam locomotives. Trains like the
Himgiri express and
Tamil Nadu express were hauled entirely by WDM-2 units. One of the most important express trains hauled by the WDM-2 class was the
Mumbai Rajdhani express. By the 1980s the WDM-2 class was hauling most of the passenger and freight trains in India. The WDM-2 locomotives have a maximum speed of , restricted to when run long hood forward. The last 3 pure units are based at
Abu Road.
Maintenance The WDM-2 has a maintenance schedule of 3,000 km or 10 days, which was recommended by ALCO. These have been extended by 20 days to 30 days by using better and more efficient lubrication oils and other component fluids and improving some bearings for the suspension. The original WDM-2 bearings were very failure-prone and often required minor repairs. However the WDM-2 was very easy to operate and maintain because of its simple construction and mechanics which resulted in it being very reliable. This maintenance is usually done at the nearest Diesel loco shed. == Variants ==