Krypton laser A krypton laser is an ion laser using ions of the
noble gas krypton as its
gain medium. The
laser pumping is done by an
electrical discharge. Krypton lasers are widely used in scientific research, and in commercial uses, when the krypton is mixed with argon, it creates a "white-light" lasers, useful for laser light shows. Krypton lasers are also used in medicine (e.g. for coagulation of
retina), for the manufacture of security
holograms, and numerous other purposes. Krypton lasers can emit visible light close to several different wavelengths, commonly 406.7 nm, 413.1 nm, 415.4 nm, 468.0 nm, 476.2 nm, 482.5 nm, 520.8 nm, 530.9 nm, 568.2 nm, 647.1 nm, and 676.4 nm.
Argon laser The argon-ion laser was invented in 1964 by William Bridges at the
Hughes Aircraft Company and it is one of the family of ion lasers that use a
noble gas as the active medium. Argon-ion lasers are used for
retinal
phototherapy (for the treatment of
diabetes),
lithography, and the
pumping of other lasers. Argon-ion lasers emit at 13 wavelengths through the visible and ultraviolet spectra, including: 351.1 nm, 363.8 nm, 454.6 nm, 457.9 nm, 465.8 nm, 476.5 nm, 488.0 nm, 496.5 nm, 501.7 nm, 514.5 nm, 528.7 nm, and 1092.3 nm. However, the most commonly used wavelengths are in the blue–green region of the visible spectrum. These wavelengths have the potential for use in underwater communications because seawater is quite transparent in this range of wavelengths. Common argon and krypton lasers are capable of emitting continuous-wave (CW) output of several milliwatts to tens of watts. Their tubes are usually made from nickel end bells,
kovar metal-to-ceramic seals,
beryllium oxide ceramics, or
tungsten disks mounted on a copper heat spreader in a ceramic liner. The earliest tubes were simple quartz, then followed by quartz with graphite disks. In comparison with the
helium–neon lasers, which require just a few milliamperes of input current, the current used for pumping the argon laser is several amperes, since the gas has to be ionized. The ion laser tube produces much
waste heat, and such lasers require active cooling. The typical noble-gas ion-laser plasma consists of a high-current-density glow discharge in a noble gas in the presence of a magnetic field. Typical continuous-wave plasma conditions are current densities of 100 to 2000 A/cm2, tube diameters of 1.0 to 10 mm, filling pressures of 0.1 to 1.0 Torr (0.0019 to 0.019 psi), and an axial magnetic field of the order of 1000 gauss.
William R. Bennett, a co-inventor of the first gas laser (the helium–neon laser), was the first to observe
spectral hole burning effects in gas lasers, and he created the theory of "hole burning" effects in laser oscillation. He was co-discoverer of lasers using electron-impact excitation in each of the noble gases, dissociative excitation transfer in the neon–oxygen laser (the first
chemical laser), and collision excitation in several metal-vapor lasers.
Other commercially available types • Ar/Kr: A mix of argon and krypton can result in a laser with output wavelengths that appear as white light. • Helium–cadmium: blue laser emission at 442 nm and ultraviolet at 325 nm. • Copper vapor: yellow and green emission at 578 nm and 510 nm.
Experimental •
Xenon •
Iodine •
Oxygen ==Applications==