Iron(II) sulfate

Industrially, ferrous sulfate is mainly used as a precursor to other iron compounds. It is a reducing agent, and as such is useful for the reduction of chromate in cement to less toxic Cr(III) compounds. Historically, ferrous sulfate was used in the textile industry for centuries as a dye fixative. It is used historically to blacken leather and as a constituent of iron gall ink. The preparation of sulfuric acid ('oil of vitriol') by the distillation of green vitriol (iron(II) sulfate) has been known for at least 700 years. Medical use Plant growth Iron(II) sulfate is sold as ferrous sulfate, a soil amendment for lowering the pH of a high alkaline soil so that plants can access the soil's nutrients. In horticulture, it is used for treating iron chlorosis. Although not as rapid-acting as ferric EDTA, its effects are longer-lasting. It can be mixed with compost and dug into the soil to create a store, which can last for years. Ferrous sulfate can be used as a lawn conditioner. Pigment and craft Ferrous sulfate can be used to stain concrete and some limestones and sandstones a yellowish rust color. Woodworkers use ferrous sulfate solutions to color maple wood a silvery hue. Green vitriol is also a useful reagent in the identification of mushrooms. Historical uses Ferrous sulfate was used in the manufacture of inks, most notably iron gall ink, which was used from the Middle Ages until the end of the 18th century. Chemical tests made on the Lachish letters () showed the possible presence of iron. It is thought that oak galls and copperas may have been used in making the ink on those letters. It also finds use in wool dyeing as a mordant. Harewood, a material used in marquetry and parquetry since the 17th century, is also made using ferrous sulfate. Two different methods for the direct application of indigo dye were developed in England in the 18th century and remained in use well into the 19th century. One of these, known as china blue, involved iron(II) sulfate. After printing an insoluble form of indigo onto the fabric, the indigo was reduced to leuco-indigo in a sequence of baths of ferrous sulfate (with reoxidation to indigo in air between immersions). The china blue process could make sharp designs, but it could not produce the dark hues of other methods. In the second half of the 1850s ferrous sulfate was used as a photographic developer for collodion process images. ==Hydrates==

is evident. Iron(II) sulfate can be found in various states of hydration, and several of these forms exist in nature or were created synthetically. • FeSO4·H2O (mineral: szomolnokite, relatively rare, monoclinic) • FeSO4·H2O (synthetic compound stable at pressures exceeding 6.2 GPa, triclinic white, relatively common, may be dehydration product of melanterite, monoclinic) • FeSO4·5H2O (mineral: siderotil, relatively rare, triclinic) • FeSO4·6H2O (mineral: ferrohexahydrite, very rare, monoclinic blue-green, relatively common, monoclinic) The tetrahydrate is stabilized when the temperature of aqueous solutions reaches . At , these solutions form both the tetrahydrate and monohydrate. Mineral forms are found in oxidation zones of iron-bearing ore beds, e.g., pyrite, marcasite, chalcopyrite, etc. They are also found in related environments, like coal fire sites. Many rapidly dehydrate and sometimes oxidize. Numerous other, more complex (either basic, hydrated, and/or containing additional cations) Fe(II)-bearing sulfates exist in such environments, with copiapite being a common example. ==Production and reactions==

In the finishing of steel before plating or coating, the steel sheet or rod is passed through pickling baths of sulfuric acid. This treatment produces large quantities of iron(II) sulfate as a by-product. : Another source of large amounts results from the production of titanium dioxide from ilmenite via the sulfate process. Ferrous sulfate is also prepared commercially by oxidation of pyrite: : It can be produced by displacement of metals less reactive than iron from solutions of their sulfate: : Reactions factory in Kaanaa, Pori, Finland. Upon dissolving in water, ferrous sulfates form the metal aquo complex [Fe(H2O)6]2+, which is an almost colorless, paramagnetic ion. On heating, iron(II) sulfate first loses its water of crystallization and the original green crystals are converted into a white anhydrous solid. When further heated, the anhydrous material decomposes into sulfur dioxide and sulfur trioxide, leaving a reddish-brown iron(III) oxide. Thermolysis of iron(II) sulfate begins at about . : Like other iron(II) salts, iron(II) sulfate is a reducing agent. For example, it reduces nitric acid to nitrogen monoxide and chlorine to chloride: : : Its mild reducing power is of value in organic synthesis. It is used as the iron catalyst component of Fenton's reagent. Ferrous sulfate can be detected by the cerimetric method, which is the official method of the Indian Pharmacopoeia. This method includes the use of ferroin solution, showing a red to light green colour change during titration. ==See also==