The mine workings are located immediately on top of a steep bank overlooking a creek. They comprise an open-cut shaft or collapsed stope with a drive extending along the strike of the reef which is about in depth. A mullock dump descends from the shaft to the creek bed. A portable engine and a portable boiler are aligned to the mine workings. The boiler is a wet bottom type constructed with early conical pointed rivets and possibly manufactured in the United States. Remnants of a stone mount for a
Cornish boiler, located alongside the portable plant, are also aligned towards the mine. A Cornish boiler, which was still on site (though not in situ) in the mid 1970s, has since been removed. South of the machinery area is a rock scatter associated with a stone and mud mortar flue and
chimney base, which may have also been
foundations for a second Cornish boiler. Further south is an iron lined assay furnace of stone construction, and a small top-fed retort kiln. There is no definite evidence of a battery, such as discarded stamps, cams or tailings. The only likely battery foundations are two short vertical iron bolts, apart, aligned with the portable engine. However these were more likely tension bolts for an engine or winch. An extensive area on the opposite bank of the creek extending west to the main road has been subjected to recent tree clearance and surface bulldozing. If a battery was located on the west side of Sandy Creek then all evidence of foundations and dumps would have been lost. Surviving plants include: • one-cylinder portable steam engine - no brand (R. Hornsby or Ruston Hornsby?) • Portable wet bottom boiler - no brand == Heritage listing ==