Robert Kronfeld was the overall winner of the 1928 Rhön Gliding Competition flying the RRG (Rhon-Rossitten-Gesellschaft)
Professor. To remain competitive with the latest designs coming from the German universities, he asked
Alexander Lippisch, the Professor's designer, for an improved version with better performance and handling. Lippisch's response was an elegant sailplane that Kronfeld named Wien after his home town. The Wien kept the layout of the Professor, with pylon-mounted single-spar wings braced with
faired struts, but the span was increased by , raising the
aspect ratio from 14 to 19.6. The fuselage was redesigned to have a smooth
ovoid section, finer aft than on the Professor and fitted with a more aerodynamically refined
fin and
rudder. Both designs used a
plywood-covered
D-box forward of the
spar, with
fabric covering behind, and their half span, parallel
chord inner wing panels were similar, though close to the fuselage the Wien's wing was strengthened with full chord plywood skin. The V-form bracing struts linked the extremes of these panels to the lower fuselage. The extra span of the Wien was in the double straight-tapered outer panels, which continued out to finer, rounded tips.
Ailerons occupied the whole
trailing edge of these sections. The Wien's open
cockpit was ahead of the wing
leading edge. There was no windscreen, and the instruments, including the still novel
variometer, were displayed horizontally, inset into the fuselage immediately in front of the pilot. The
undercarriage consisted of a single enclosed skid and a small spring tailskid. The rear fixed surfaces, ply covered, were very narrow, though the root of the
fin was carefully faired into the fuselage. The tapered control surfaces were fabric covered. ==Operational history==