M-PHY

M-PHY (like its predecessor D-PHY) is intended to be used in high-speed point-to-point communications, for example video Camera Serial Interfaces. The CSI-2 interface was based on D-PHY (or C-PHY), while the newer CSI-3 interface is based on M-PHY. M-PHY was designed to supplant D-PHY in many applications, but this is expected to take a number of years. The M-PHY the physical layer is also used in a number of different high-speed emergent industry standards, DigRF (High speed radio interface), MIPI LLI (Low latency memory interconnect for multi-processors systems), and one possible physical layer for the UniPro protocol stack. ==Signaling speed and gears==

M-PHY supports a scalable variety of signaling speeds, ranging from 10 kbit/s to over 11.6 Gbit/s per lane. This is accomplished using two different major signaling/speed modes, a simple low-speed (using PWM) mode and high speed (using 8b10b). Communications goes on in bursts, and the design of both high-speed and low-speed forms allows for extended periods of idle communications at low-power, making the design particularly suitable for mobile devices. Within each signaling method, a number of standard speeds, known as "gears", is defined, with the expectation that additional gears will be defined in future versions of the standard. == References ==