M6 aircrew survival weapon

The M6 was originally developed in 1946 for the Air Materiel Command of what was then still the United States Army Air Forces by the United States Army Ordnance Corps. Its official designation was Rifle-Shotgun, Survival, Caliber .22/.410. It was designed to fit into the standard USAAF (later USAF) survival kit issued to all pilots flying over the Arctic and other uninhabited regions. ==Design==

The M6 is made of stamped sheet steel, with a forged steel removable barrel assembly. The barrel assembly is connected to the stock/action group by means of a removable hinge pin. Unlike nearly all other firearms, there is no "furniture" on the M6 like a butt stock or a forearm, the only parts which are not steel are the rubber butt plate and cheek rest. Aircrew were instructed to wrap the barrels with parachute cord as a field expedient fore-stock. The M6 was a superposed ("over-under") combination gun, with a .22 Hornet rifle barrel located above the .410 bore shotgun barrel. It has 14-inch barrels and folds in half to a minimum size of 15 inches. A firing pin selector allowed the shooter to choose which barrel would be fired. The M6 was not intended to engage hostile troops, but to enable downed aircrew to forage for wild game and defend themselves from dangerous animals. Its rifle element was considered to be accurate up to 200 yards. Overall weight of the initial version, including stored ammunition, was around three pounds. ==Other versions==

Being a military firearm, the originals were sold only to the US military. The Springfield Armory M6 Scout is virtually identical to the original M6 and was made in three versions, a .22 Hornet over .410 gauge, a .22 Long Rifle over .410 gauge and a .22 Magnum over .410 gauge. and Picatinny rails for mounting a wide range of sights and scopes. In 2010, Chiappa began marketing a version of the Aircrew Survival Weapon called the Chiappa M6 Survival Gun. The Chiappa has a 12 gauge shotgun or 20 gauge barrel over a .22 Long Rifle or .22 Magnum barrel. In addition, it comes with "X Caliber" adapters sleeves that fit inside the 12 gauge barrel allowing it to fire: .380 ACP, 9mm Luger, .38 Special, .357 Magnum, .40 S&W, .44 Special, .44 Magnum, .45 ACP, .45 Long Colt, .410 bore and 20 gauge ammunition. It has a similar appearance to the original M6, however it's a unique design that uses a skeletonized metal buttstock that surrounds a polypropylene foam insert. It also uses double triggers and an enclosed firing mechanism. In 2019, a version began to be produced by TPS Arms. While very similar to the Springfield version, it added a cross bolt safety and removed the hammer selector safety. ==See also==