The incompressible MHD equations for constant mass density, \rho_\text{m} = 1 , are \begin{align} \nabla \cdot \mathbf{u} & = 0, & \frac{\partial \mathbf{u}}{\partial t} + \mathbf{u} \cdot \nabla \mathbf{u} & = -\nabla p + \mathbf{B} \cdot \nabla \mathbf{B} + \nu \nabla^2 \mathbf{u}, \\[8pt] \nabla \cdot \mathbf{B} & = 0, & \frac{\partial \mathbf{B}}{\partial t} + \mathbf{u} \cdot \nabla \mathbf{B} & = \mathbf{B} \cdot \nabla \mathbf{u} + \eta \nabla^2 \mathbf{B}. \\[5pt] \end{align} where • represents the velocity, • represent the magnetic field, • represents the total pressure (thermal+magnetic) fields, • \nu is the
kinematic viscosity and • \eta represents
magnetic diffusivity. The third equation is the
incompressibility condition. In the above equation, the
magnetic field is in Alfvén units (same as velocity units). That is, \mathbf{B} is normalized as \mathbf{B}/\sqrt{\mu_0 \rho} . The total magnetic field can be split into two parts: \mathbf{B} = \mathbf{B_0} + \mathbf{b} (mean + fluctuations). The above equations in terms of Elsässer variables ( \mathbf{z}^{\pm} = \mathbf{u} \pm \mathbf{b} ) are \frac{\partial \mathbf{z}^\pm}{\partial t} \mp \left(\mathbf{B}_0 \cdot \nabla\right) \mathbf z^\pm + \left(\mathbf z^\mp \cdot \nabla\right) \mathbf z^\pm = - \nabla p + \nu_+ \nabla^2 \mathbf{z}^\pm + \nu_- \nabla^2 \mathbf{z}^\mp where \nu_\pm = \frac{1}{2}(\nu \pm \eta) . Nonlinear interactions occur between the Alfvénic fluctuations z^{\mp} . The important nondimensional parameters for MHD are • Reynolds number Re = U L /\nu • Magnetic Reynolds number Re_M = U L /\eta • Magnetic Prandtl number P_M = \nu / \eta. The
magnetic Prandtl number is an important property of the fluid. Liquid metals have small magnetic Prandtl numbers, for example, liquid sodium's P_M is around 10^{-5} . But plasmas have large P_M . The Reynolds number is the ratio of the nonlinear term \mathbf{u} \cdot \nabla \mathbf{u} of the Navier–Stokes equation to the viscous term. While the
magnetic Reynolds number is the ratio of the nonlinear term and the diffusive term of the
induction equation. In many practical situations, the Reynolds number Re of the flow is quite large. For such flows typically the velocity and the magnetic fields are random. Such flows are called to exhibit MHD turbulence. Note that Re_M need not be large for MHD turbulence. Re_M plays an important role in dynamo (magnetic field generation) problem. The mean magnetic field plays an important role in MHD turbulence, for example it can make the turbulence anisotropic; suppress the turbulence by decreasing
energy cascade etc. The earlier MHD turbulence models assumed
isotropy of turbulence, while the later models have studied anisotropic aspects. More discussions on MHD turbulence can be found in Biskamp, Verma. and Galtier. == Isotropic models ==