All trains on the Brünig line enter and leave the station at its western end, and must reverse in the station to continue their journey. Immediately to the west of the station is a junction and trains heading to
Interlaken continue westwards down the valley of the
Aare, whilst trains heading to
Lucerne turn to the north and commence their climb to the
Brünig Pass. The line up to the Brünig Pass is equipped with
rack rails, and Meiringen is the furthest station from Interlaken that can be served by trains not fitted with rack equipment. Trains on the Meiringen–Innertkirchen railway enter and leave by the station's eastern end. Although both railways are
metre gauge and are physically connected, they use incompatible electrification systems. There are no through passenger trains, although freight traffic is interchanged. The station has two west facing terminal platform tracks, numbered 1 and 2, and a third through platform track, numbered 3 for most of its length but 13 at its eastern end. Track 1 is served by a side platform adjacent to the station buildings, whilst 2 and 3 flank an island platform accessed by a concourse across the terminal end of tracks 1 and 2. Tracks 1, 2 and 3 are used by Brünig line trains, track 13 by Meiringen–Innertkirchen trains. To the east of the station, the Meiringen–Innertkirchen railway crosses a level crossing and to the east of this is a further platform and terminal track. This was previously used by the Meiringen–Innertkirchen railway as its terminus, before a reorganisation of track and electrification systems allowed its extension into the main station. Construction of the proposed
Grimsel Tunnel would extend the railway route southwards under the
Grimsel Pass to
Oberwald railway station. == Services ==