Menter's Shear Stress Transport

The SST two equation turbulence model was introduced in 1994 by F.R. Menter to deal with the strong freestream sensitivity of the k-omega turbulence model and improve the predictions of adverse pressure gradients. The formulation of the SST model is based on physical experiments and attempts to predict solutions to typical engineering problems. Over the last two decades the model has been altered to more accurately reflect certain flow conditions. The Reynold's Averaged Eddy-viscosity is a pseudo-force and not physically present in the system. The two variables calculated are usually interpreted so k is the turbulence kinetic energy and omega is the rate of dissipation of the eddies. ==SST (Menter’s Shear Stress Transport) turbulence model==

Source: \frac{\partial (\rho k)}{\partial t} + \frac{\partial (\rho u_j k)}{\partial x_j} = P - \beta^* \rho \omega k + \frac{\partial}{\partial x_j} \left[\left(\mu + \sigma_k \mu_t \right)\frac{\partial k}{\partial x_j}\right] \frac{\partial (\rho \omega)}{\partial t} + \frac{\partial (\rho u_j \omega)}{\partial x_j} = \frac{\gamma}{\nu_t} P - \beta \rho \omega^2 + \frac{\partial}{\partial x_j} \left[ \left( \mu + \sigma_{\omega} \mu_t \right) \frac{\partial \omega}{\partial x_j} \right] + 2(1-F_1) \frac{\rho \sigma_{\omega 2}}{\omega} \frac{\partial k}{\partial x_j} \frac{\partial \omega}{\partial x_j} ==Variable Definition==

P = \tau_{ij} \frac{\partial u_i}{\partial x_j} \tau_{ij} = \mu_t \left(2S_{ij} - \frac{2}{3} \frac{\partial u_k}{\partial x_k} \delta_{ij} \right) - \frac{2}{3} \rho k \delta_{ij} S_{ij} = \frac{1}{2} \left( \frac{\partial u_i}{\partial x_j} + \frac{\partial u_j}{\partial x_i} \right) \mu_t = \frac{\rho a_1 k}{{\rm max} (a_1 \omega, \Omega F_2)} F_1 = {\rm tanh} \left({\rm arg}_1^4 \right) {\rm arg}_1 = {\rm min} \left[ {\rm max} \left( \frac{\sqrt{k}}{\beta^*\omega d}, \frac{500 \nu}{d^2 \omega} \right) , \frac{4 \rho \sigma_{\omega 2} k}{{\rm CD}_{k \omega} d^2} \right] {\rm CD}_{k \omega} = {\rm max} \left(2 \rho \sigma_{\omega 2} \frac{1}{\omega} \frac{\partial k}{\partial x_j} \frac{\partial \omega}{\partial x_j}, 10^{-20} \right) F_2 = {\rm tanh} \left({\rm arg}_2^2 \right) {\rm arg}_2 = {\rm max} \left( 2 \frac{\sqrt{k}}{\beta^* \omega d}, \frac{500 \nu}{d^2 \omega} \right) The constants β, σk, σω are computed by a blend from the corresponding constants via the following formula \phi = F_1 \phi_1 + (1-F_1) \phi_2 ==Constants==

K-W Closure \sigma_{k1} = 0.85 , \sigma_{w1} = 0.65 , \beta_{1} = 0.075 K-e Closure \sigma_{k2} = 1.00 , \sigma_{w2} = 0.856 , \beta_{2} = 0.0828 SST Closure Constants \beta^* = 0.09 , a_1 = 0.31 ==Boundary and Far Field Conditions==

Far Field \frac{U_{\infty}}{L} \frac{10^{-5} U_{\infty}^2}{Re_L} Boundary/Wall Conditions \omega_{wall} = 10 \frac{6 \nu}{\beta_1 (\Delta d_1)^2} k_{wall} = 0 Most software implementations like OpenFOAM and ANSYS Fluent do not include the factor of 10 for omega at the wall, following a Wilcox formulation. However, in F.R. Menter states: "present author found it much easier and as accurate to implement the following boundary condition" ==Validation with experimental results==

A good agreement between mass-transfer simulations with experimental data were attained for turbulent flow using the SST two equation turbulence model developed by F.R. Menter for rectangular and tubular shapes, a modified hydrocyclone and for curved rotating systems taking into account a curvature correction term. ==References==