A large number of technologies underlie the microarray platform, including the material substrates, spotting of biomolecular arrays, and the microfluidic packaging of the arrays. Microarrays can be categorized by how they physically isolate each element of the array, by spotting (making small physical wells), on-chip synthesis (synthesizing the target DNA probes adhered directly on the array), or bead-based (adhering samples to barcoded beads randomly distributed across the array).
Production process The initial publication on microarray production process dates back to 1995, when 48
cDNAs of a plant were printed on glass slide typically used for light microscopy, modern microarrays on the other hand include now thousands of probes and different carriers with coatings. The fabrication of the microarray requires both biological and physical information, including sample libraries, printers, and slide substrates. Though all procedures and solutions always dependent on the fabrication technique employed. The basic principle of the microarray is the printing of small stains of solutions containing different species of the probe on a slide several thousand times. Modern printers are
HEPA-filtered and have controlled humidity and temperature surroundings, which is typically around 25°C, 50% humidity. Early microarrays were directly printed onto the surface by using printer pins which deposit the samples in a user-defined pattern on the slide. Modern methods are faster, generate less cross-contamination, and produce better spot morphology. The surface to which the probes are printed must be clean, dust free and hydrophobic, for high-density microarrays. Slide coatings include poly-L-lysine, amino silane, epoxy and others, including manufacturers solutions and are chosen based on the type of sample used. Ongoing efforts to advance microarray technology aim to create uniform, dense arrays while reducing the necessary volume of solution and minimizing contamination or damage. For the manufacturing process, a sample library which contains all relevant information is needed. In the early stages of microarray technology, the sole sample used was
DNA, obtained from commonly available clone libraries and acquired through
DNA amplification via bacterial vectors. Modern approaches do not include just
DNA as a sample anymore, but also proteins, antibodies, antigens, glycans, cell lysates and other small molecules. All samples used are presynthesized, regularly updated, and more straightforward to maintain. Array fabrication techniques include contact printing, lithography, non-contact and cell free printing.
Lithography Lithography combines various methods like Photolithography, Interference lithography, laser writing, electron-beam and Dip pen. The most widely used and researched method remains Photolithography, in which photolithographic masks are used to target specific nucleotides to the surface.
UV light is passed through the mask that acts as a filter to either transmit or block the light from the chemically protected microarray surface. If the
UV light has been blocked, the area will remain protected from the addition of nucleotides, whereas in areas which were exposed to UV light, further nucleotides can be added. With this method high-quality custom arrays can be produced with a very high density of
DNA features by using a compact device with few moving parts.
Non contact Non-contact printing methods vary from
Photochemistry-based printing, Electro-printing and droplet dispensing. In contrast to the other methods, non-contact printing does not involve contact between the surface and the stamp, pin, or other used dispenser. The main advantages are reduced contamination, lesser cleaning and higher throughput which increases steadily. Many of the methods are able to load the probes in parallel, allowing multiple arrays to be produced simultaneously. ==See also==