Microprinting

Currency commonly exhibits the highest quality (smallest size) of microprint because it demands the highest level of counterfeiting deterrence. For example, on the series 2004 United States $20 bill, microprint is hidden within the border in the lower left corner of the obverse (front) side, as well as the Twenty USA background. There was passing interest in microprinting as a solution to book storage in libraries in the 1940s. Librarian Fremont Rider championed microprinting over micro-film for its reduced cost. He also suggested that entire books could be printed on the backs of library catalog cards, which are generally blank, replacing the storage of full-sized books on library shelves. ==Production==

Microprint of the smallest scale is only producible by hand using engraved offset printing plates or some other method of intaglio (printmaking). Digital microtext printers utilize specially designed fonts and ink for the purpose. The ink used is most commonly MICR (Magnetic Ink Character Recognition) toner particles but may also be polyester based toners and styrene acrylate polymer based toners. The ink is not limited to grayscale only, but may also use color toners or even more specialized toners containing dyes sensitive to ultraviolet or infrared radiation and producing fluorescence when exposed to those radiations. Microprint of the scale capable by other printing methods cannot be produced by a digital printer regardless of the resolution of the device. Some digital fonts are designed specifically for the purpose of microprinting. These pseudo-microprint fonts are referred to as microtext. (equivalent to 0.72 points). In April 2015, Videojet Technologies released their 1650 High Resolution (HR) and 1620 HR Continuous Inkjet (CIJ) printers, said to be capable of printing sub-pixel size characters as small as 0.6 mm in height (equivalent to 1.70079 points). The printers use a 40-micron nozzle that outputs more than 100,000 drops of ink per second. While these printers make microprinting faster and easier to produce digitally, they still have not reached the true sub-pixel size of less than 1 point. The smallest scale microtext a laser printer can produce is 0.5 pt. ==Microstructures==

Using gold nanoparticle inks on a glass substrate, scientists concluded that it was possible for them to control the production of print patterns to a scale of 2 microns. After printing, the nano-particle ink suspension was heated using a Gaussian laser; as it heated, the glass would expand due to the thermal conductivity of the gold nano-ink. In further experiments, they were able to fuse the nano-particles together into a tighter formation a continuous conductive line. Such experiments did not directly include font characters but could translate to such usage. ==See also==