Microvalve

Active microvalves Active mechanical microvalves consist of mechanically movable membrane or boss structure, coupled to an actuation method, that can close off an orifice, thus blocking the flow path between the inlet and outlet ports. The actuator can either be an integrated magnetic, electrostatic, piezoelectric or thermal microactuator, a "smart" phase change, e.g. Shape-memory alloy, or rheological material, or an externally applied actuation mechanism, such as an external magnetic field or pneumatic source. Passive microvalves Passive microvalves are valves for which the operational state, i.e. open or close, is determined by the fluid they control. Most common passive microvalves are flap valves, membrane microvalves and ball microvalves. == Applications ==

Gas microvalves Controlling a gas flow with MEMS microvalves has the following general benefits: the integration of the actuation mechanism with the other microvalve components allows component miniaturization; and the small scale of the component results in a rapid response time and a low-power consumption. However, despite the potential for cost-efficient batch fabrication offered by microelectromechanical systems (MEMS) technologies, gas microvalves have so far failed to reach the critical cost-per-performance ratio needed for a wide adoption of this technology. Check valves Most check valves, are incorporated in inlets and outlets of reciprocal displacement micropumps, where they provide the liquid rectification needed for the valve to have a net pump flow in one direction. == References ==