Midland Railway Paget locomotive

The locomotive had a total of eight uniflow cylinders arranged in two groups of four placed between the 1st and 2nd and 2nd and 3rd driving axles, with rotary steam distribution valves placed over each; a bronze sleeve in the valve body was rotated to control cutoff. Two were connected to the forward pair of the six driving wheels. Four were connected, two each side to the centre pair, with the final two behind the last pair. These drove a jackshaft which operated and reversed the valves, and cut off was controlled by rotary sleeves. The boiler was large and had an unusual integral firebox, lined with firebricks. Two-wheel pony trucks were fitted front and rear. It was the first 2-6-2 tender locomotive in Great Britain and would be the only one until the LNER Class V2 of 1936. ==Finance==

Paget had initially financed it himself but eventually ran out of money, thus the railway made up for the difference. There had been a history on the railway's of a distrust of new ideas and Paget and Deeley were not on good terms, with Lowe suggesting a great hostility to it. ==Problems==

It had problems with seizing of the phosphor bronze sleeves in the cast iron steam chest, with leakage in the glands and piston rings. In 1912, one of the rotary valves seized while on a test run, the engine blocking the main line for seven hours. As a result, it was put in store at Derby and was broken up in 1918, while Paget was in France commanding the Royal Engineers Railway Operating Division. ==References==