Nokia Pop-Port

The port carries signals for hands-free microphone, stereo speakers, FBus Rx/Tx or USB signals for the phones supporting them, power output for feeding the accessories that do not have their own batteries, and the Accessory Control Interface (ACI), a bidirectional serial control bus for connection and authentication of phone accessories, with a specific ASIC inside accessories and a proprietary protocol. It is also used to upgrade USB-enabled phones' software using a specific USB data cable and the Nokia Software Updater. Earlier cables connected to RS-232 but later was replaced by USB. ==Criticisms==

A common problem with Pop-port was that contacts often lost connection, thus resulting in drop-outs in audio (when a hands-free device is used) or an unstable data connection (when a USB cable is used). This was a common problem when listening to music from the phone while the phone was in a pocket. The more stable 2.5 mm and 3.5 mm audio sockets aren't prone to such problems. The contacts are exposed to dust and dirt, more so than those of a TRRS socket. This, combined with the small size of the contacts, prevented connections in some cases. Also, the plug's 'hook' tended to lose its hooking capability, making it even easier to accidentally lose connection. The data cables had to be original in most cases. ==Available Pop-Port plug-ins==

• Camera • FM radio • Headphones • LCD remote controller • USB cable • 3.5mm stereo plug adapter • Flash • 8P8C (RJ-45) cable (CA-41) • CarKit ==See also==