GPON

GPON uses passive optical network (PON) is a fiber-optic access architecture in which a single optical fiber from a central location is shared by multiple end users through one or more passive optical splitters in series (cascaded). Unlike traditional point-to-point fiber connections, PON systems distribute optical signals from an optical line terminal (OLT) to many optical network units (ONUs) or optical network terminals (ONTs) without requiring active electronic equipment in the distribution network. The absence of powered components between the central location and subscribers reduces infrastructure costs, simplifies maintenance, and increases reliability. == Features ==

The standard specifies transmission convergence layer, physical layer requirements, management protocols, and service encapsulation for high-speed fiber access networks. GPON puts requirements on the optical medium and the hardware used to access it, and defines the manner in which Ethernet frames are converted to an optical signal, as well as the parameters of that signal. The bandwidth of the single connection between the optical line termination (OLT) and the optical network terminals (ONTs) is 2.4Gbit/s down, 1.2Gbit/s up, or rarely symmetric 2.4Gbit/s, The exact kind of fibre cable and connectors to use is undefined but is broadly using OS2 cable with SC/APC connectors. This is similarly to Ethernet 1000BASE-BX10/20/40/80/120/160, which typically specifies a fixed optical reach using separate upstream and downstream wavelengths (often referred to as Base-BX-U and Base-BX-D), GPON attenuation classes define broader link budgets to accommodate passive optical splitters and shared fiber infrastructure, resulting in significantly higher allowable optical loss than typical point-to-point Ethernet fiber links. Power-levelling mechanism The power-levelling mechanism in GPON is used to control the optical transmit power of the ONUs in the upstream direction. In a PON, multiple ONUs share the same optical distribution network and transmit bursts of upstream data toward the central OLT. Because ONUs may be located at different distances from the OLT and have different optical path losses, the received optical power at the OLT can vary significantly. The power-levelling mechanism allows the ONUs transmitter to adjust its launched optical power to compensate for these variations, ensuring that upstream bursts arrive at the OLT within an acceptable dynamic range. The mechanism operates by defining different ONUs transmit power levels and corresponding detection thresholds at the central OLT During operation, the central OLT measures the received optical power from each ONU and determines whether the power level falls within the desired operating window. If necessary, the OLT sends PLOAM Change_power_level message, the ONU adjusts its transmit power to maintain stable reception and prevent receiver overload or insufficient signal levels. == Comparison to other related standards ==

In contrast to ADSL technology, which deteriorates as the distance between the central office and the household rises, with severe signal loss beyond 3km, all customers may enjoy high-speed network access within the 16km range of a fibre central office. ==The standards==

The first version of GPON was ratified in 2003. • G.984.3 : Transmission convergence layer specification, 2008, with amendments 1 (2009), 2 (2009), 3 (2012) and erratum 1 (2010) • G.984.4 : ONT management and control interface (OMCI) specification, 2008, with amendments 1 (2009), 2 (2009), 3 (2010), erratum 1 (2009), corrigendum 1 (2010), and an implementer's guide (2009) • G.984.5 : Enhancement Band, 2014, Coexistence with future WDM PON technology on the same medium • G.984.6 : Reach extension (2008), with amendments 1 (2009) and 2 (2012) • G.984.7 : Long reach (2010) The GPON OMCI recommendation G.984.4 draws on G.983.2, which defines the BPON management model. However, G.984.4 removed all references to ATM. G.988 is a stand-alone OMCI recommendation and supersedes G.984.4 except for GPON specifics that are not defined in G.988. Future work on the PON management model is expected to appear only in the GPON space. == Security ==

Security issues in the G.984 standard series include the possibility of eavesdropping on upstream traffic, replay attacks, PLOAM messages that are not integrity protected and denial of service to other subscribers on the same link. ==See also==