Organozinc chemistry

In its coordination complexes zinc(II) adopts several coordination geometries, commonly octahedral, tetrahedral, and various pentacoordinate geometries. These structural flexibility can be attributed to zinc's electronic configuration [Ar]3d104s2. The 3d orbital is filled, and therefore, ligand field effects are nonexistent. Coordination geometry is thus determined largely by electrostatic and steric interactions. Because zinc has a large atomic radius and low electron deficiency, organozinc compounds rarely saturate zinc's coordination sphere. Instead, they are usually two- or three-coordinate, reflecting strong donation from the carbanionic ligands. Diorganozinc species complex ethereal solvents only weakly, and bridging alkyl or aryl groups are rare. Exceptions are Ph2Zn and certain metal clusters: generating sp-hybridization in the molecular orbitals. The symmetric molecules have no dipole moment, and dissolve easily in nonpolar solvents like cyclohexane. When a halogen ligand is added to the zinc atom, the molecule is polarized and both the acceptor and donor character of zinc is enhanced, allowing for aggregation. ==Synthesis==

Several methods exist for the generation of organozinc compounds. Commercially available diorganozinc compounds are dimethylzinc, diethylzinc and diphenylzinc, but these reagents are expensive and difficult to handle. From zinc metal Frankland's original synthesis of diethylzinc involves the reaction of ethyl iodide with zinc metal. Similar to formation of a Grignard reagent, the zinc must be activated to facilitate this redox reaction, One of such activated form of zinc employed by Frankland is zinc-copper couple: \ce{{ZnCl2} + 2K ->[\ce{THF}][\ce{-2KCl}]} \overbrace\ce{Zn^0}^\ce{Riecke\ zinc} + \ce{R-X ->[\ce{THF}][20-60^\circ\ce C] R-Zn-I} \qquad \begin{cases} \mathbf{R}: &\text{Allyl, Aryl, Alkyl, Benzyl}\\ \mathbf{X}: &\text{Bromide, Iodide} \end{cases} In some cases, a weak Lewis acid, suffices to activate the zinc metal. For example, in the following synthesis, 1,2-dibromoethane and trimethylsilyl chloride catalyze formation of the final organozinc through transmetallation, but a key ingredient is lithium chloride, which quickly forms a soluble adduct with the bromoethylzinc intermediate, removing it from the metal surface: Formation of organozinc reagents is generally facilitated when alkyl or aryl halides bearing electron-withdrawing substituents, e.g., nitriles and esters; these are the first step in the Reformatsky and Blaise reactions. Zinc-halogen exchange One of the most common zinc functional group interconversion reactions forms a complicated organozinc compound from exchange of an alkyl halide with a cheaper organozinc: :RI + ZnMe2 → R2Zn + MeI The reaction requires either copper iodide (CuI) or base catalysis. Transmetallation A wide variety of organo-metal and organo-semimetal compounds admit transmetallation to organozincs. One example is the reaction of diphenylmercury with zinc metal to form diphenylzinc and metallic mercury: The benefit of transmetalation to zinc is improved functional group tolerance: organozincs are less reactive than many organometals, and consequently selective for the most reactive site in the molecule. For example, zinc moderates various alkyllithium reagents: • In the synthesis of Maoecrystal V, a directed ortho metalation gives the initial aryl-lithium species, which is transmetallated to the desired arylzinc compound. The arylzinc compound is significantly less reactive than the aryl-lithium species and thus better tolerates the ester functionality in the subsequent coupling with methyl chlorooxaloacetate. • In one study, phenyllithium is too reactive in a chiral Grignard-like addition, giving a racemic alcohol even when a chiral catalyst is present. However, transmetalation and chelation of the lithium chloride/bromide wastes gives diphenylzinc, which reacts slowly enough for a borneol-derived chiral catalyst to select the enantiomer: : 4 equivalents of n-butyllithium convert bromobenzene to phenyllithium; then transmetalation with zinc chloride forms diphenylzinc, with the lithium halides chelated away by tetraethylethylene diamine. The diphenylzinc then adduces the chiral catalyst and adds the phenyl group to 2-naphthylaldehyde. The product is a 2-naphthylphenylmethanol with an enantiomeric excess of 92%. ==Reactions==

In many of their reactions organozincs appear as intermediates. Absent additional activation, diorganozinc compounds are generally too nonpolar to react with carbonyl compounds, but do attack unpolarized C-C multiple bonds. Organozinc compounds can be used in allylation, or other coupling reactions (such as Negishi coupling): One of the major drawbacks of diorganozinc alkylations is that only one of the two alkyl substituents is transferred. This problem can be solved by using trimethylsilylmethyl- (Me3SiCH2-), which is stabilized through negative hyperconjugation in silicon and does not transfer: \begin{array}{l} {}\\ \ce{{R2Zn} + (TMSM)2Zn}\ \overset\ce{THF}\ce{>} \ \ce{2R(TMSM)Zn}\\ {}\\ \ce{{RZnI} + (TMSM)Li ->[\ce{THF}][-80^\circ\!\ce C] {R(TMSM)Zn} + LiI}\\ {} \end{array} Reformatsky reaction This organic reaction can be employed to convert α-haloester and ketone or aldehyde to a β-hydroxyester. Acid is needed to protonate the resulting alkoxide during work up. The initial step is an oxidative addition of zinc metal into the carbon-halogen bond, thus forming a carbon-zinc enolate. This C-Zn enolate can then rearrange to the Oxygen-Zinc enolate via coordination. Once this is formed the other carbonyl containing starting material will coordinate in the manner shown below and give the product after protonation. The benefits of the Reformatsky reaction over the conventional aldol reaction protocols is the following: • Allows for exceedingly derivatized ketone substrates • The ester enolate intermediate can be formed in the presence of enolizable moieties • Well suited for intramolecular reactions Below shows the six-membered transition state of the Zimmerman–Traxler model (Chelation Control, see Aldol reaction), in which R3 is smaller than R4. The Reformatsky reaction has been employed in numerous total syntheses such as the synthesis of C(16),C(18)-bis-epi-cytochalasin D: The Reformatsky reaction even allows for with zinc homo-enolates. A modification of the Reformatsky reaction is the Blaise reaction. The reaction is mechanistically related to the Tebbe reaction and can be catalyzed by various Lewis acids (e.g. TiCl4 or Al2Me6). The reaction is used to introduce deuterium into molecules for isotopic labeling or as an alternative to the Wittig reaction. Negishi coupling This powerful carbon-carbon bond forming cross-coupling reactions combines an organic halide and an organozinc halide reagent in the presence of a nickel or palladium catalyst. The organic halide reactant can be alkenyl, aryl, allyl, or propargyl. Alkylzinc coupling with alkyl halides such as bromides and chlorides have also been reported with active catalysts such as Pd-PEPPSI precatalysts, which strongly resist beta-hydride elimination (a common occurrence with alkyl substituents). Either diorganic species or organozinc halides can be used as coupling partners during the transmetallation step in this reaction. Despite the low reactivity of organozinc reagents on organic electrophiles, these reagents are among the most powerful metal nucleophiles toward palladium. Alkylzinc species require the presence of at least a stoichiometric amount of halide ions in solution to form a "zincate" species of the form RZnX32−, before it can undergo transmetalation to the palladium centre. This behavior contrasts greatly with the case of aryl zinc species. A key step in the catalytic cycle is a transmetalation in which a zinc halide exchanges its organic substituent for another halogen with the metal center. An elegant example of Negishi coupling is Furstner's synthesis of amphidinolide T1: Fukuyama coupling Fukuyama coupling is a palladium-catalyzed reaction involving the coupling of an aryl, alkyl, allyl, or α,β- unsaturated thioester compound. This thioester compound can be coupled to a wide range of organozinc reagents in order to reveal the corresponding ketone product. This protocol is useful due to its sensitivity to functional groups such as ketone, acetate, aromatic halides, and even aldehydes. The chemoselectivity observed indicates ketone formation is more facile than oxidative addition of palladium into these other moieties. A further example of this coupling method is the synthesis of (+)-biotin. In this case, the Fukuyama coupling takes place with the thiolactone: Barbier reaction The Barbier reaction involves nucleophilic addition of a carbanion equivalent to a carbonyl. The conversion is similar to the Grignard reaction. The organozinc reagent is generated via an oxidative addition into the alkyl halide. The reaction produces a primary, secondary, or tertiary alcohol via a 1,2-addition. The Barbier reaction is advantageous because it is a one-pot process: the organozinc reagent is generated in the presence of the carbonyl substrate. Organozinc reagents are also less water sensitive, thus this reaction can be conducted in water. Similar to the Grignard reaction, a Schlenk equilibrium applies, in which the more reactive dialkylzinc can be formed. Zinc acetylides The formation of the zinc acetylide proceeds via the intermediacy of a dialkynyl zinc (functional group exchange). Catalytic processes have been developed such as Merck's ephedrine process. Propargylic alcohols can be synthesized from zinc acetylides. These versatile intermediates can then be used for a wide range of chemical transformations such as cross-coupling reactions, hydrogenation, and pericyclic reactions. In the absence of ligands, the reaction is slow and inefficient. In the presence of chiral ligands, the reaction is fast and gives high conversion. Ryoji Noyori determined that a monozinc-ligand complex is the active species. Diastereoselectivity for addition of organozinc reagents into aldehydes can be predicted by the following model by Noyori and David A. Evans: • The α-stereocenter of the ligand dictates observed stereochemistry of the propargylic alcohols • The steric effects between the aldehyde substituent and the ligand are less important but still dictate the favored conformation Zinc-acetylides are used in the HIV-1 reverse transcriptase inhibitor Efavirenz as well as in Merck's ephedrine derivatives . ==Organozincates==

The first organozinc ate complex (organozincate) was reported in 1858 by James Alfred Wanklyn, an assistant to Frankland and concerned the reaction of elemental sodium with diethylzinc: :2 Na + 3 ZnEt2 → 2 NaZnEt3 + Zn Organozinc compounds that are strongly Lewis acidic are vulnerable to nucleophilic attack by alkali metals, such as sodium, and thus form these 'ate compounds'. Two types of organozincates are recognized: tetraorganozincates ([R4Zn]M2), which are dianionic, and triorganozincates ([R3Zn]M), which are monoanionic. Their structures, which are determined by the ligands, have been extensively characterized. :2 NaZnEt3 → Na2Zn2H2Et4 + 2 C2H4 The product is an edge-shared bitetrahedral structure, with bridging hydride ligands. Reactions Although less commonly studied, organozincates often have increased reactivity and selectivity compared to the neutral diorganozinc compounds. They have been useful in stereoselective alkylations of ketones and related carbonyls, ring opening reactions. Aryltrimethylzincates participate in vanadium mediated C-C forming reactions. ==Organozinc(I) compounds==

Low valent organozinc compounds having a Zn–Zn bond are also known. The first such compound, decamethyldizincocene, was reported in 2004. == See also ==