Original Peabody action The Peabody action was developed by Henry Oliver Peabody (13 May 1826
Boxford, Massachusetts – 28 June 1903
Hull, Massachusetts) from
Boston,
Massachusetts, and was first patented on July 22, 1862. While the Peabody was not perfected in time for the
American Civil War, a few were entered in the trials of 1864 with favorable reports. Peabody carbines and rifles were made by the
Providence Tool Company,
Providence, Rhode Island; c. 1866–1871. The total production was 112,000 for all models. Calibers were: .45 Peabody rimfire;
.45-70 Government; .50 rimfire;
50-70;
11 mm Spanish;
10.4 mm rimfire Swiss. Barrel length carbine 20", rifle 33". Finish: Receiver casehardened, barrel blued, iron mountings, walnut stock. The majority of Peabody's production was for foreign contracts. They were adopted by the militaries of Canada (3,000 pieces), Spain, Mexico, France (33,000), Romania, and Switzerland (15,000) during the later 1860s. In the United States, Massachusetts purchased 2,941 rifles, Connecticut in circa 1871–72 purchased 2,000 Spanish model rifles and South Carolina in circa 1877 purchased 350 carbines. The Peabody rifle was one of a half dozen different rifles that took part in the 1866 Norwegian-Swedish rifle trials, where it lost out to the Remington rolling block (which became the
Remington M1867 in Norwegian and Swedish service) because of its greater complexity, with more parts than the Remington design. The Swiss gunsmith Friedrich von Martini created an action that somewhat resembled Peabody's, but incorporated a hammerless internal striker and used a toggle moved by the striker to lock the action during firing. Mated to a barrel with rifling designed by
Alexander Henry, the
Martini–Henry M1871 would become the British Army's standard rifle for twenty years. The Liberian 600 Peabody rifles were bought in 1910, during the war with the Grebo tribe, from the German government via the
Woermann Co. (de). They had been captured from the French army during the
Franco-Prussian War and were sold along with tonnes of gunpowder, 200,000 rounds of ammunition, and 400 Mauser M1888 carbines. The cost was $20,000. In 1919, Liberians received Peabody rifles through US arms sales.
Peabody Conversion Action (1867) . The breechblock with tailpiece is clearly visible. Available records show that the third patent (No. 72,076, issued on Dec. 10, 1867) obtained by Mr. Peabody was on an action system specifically designed and constructed for use in converting military muzzleloading muskets into breech-loading arms. By the end of the
American Civil War the self-contained metallic cartridge was well-established; conversions of muzzle-loading rifles had already commenced, and it seemed to be a profitable venture to get into. Evidently with this in mind, Peabody developed such an action based on his original idea of the rear-pivoted breechblock, for use with
Springfield and
Enfield muzzle-loading muskets. The Peabody alteration is simply a shallow version of his original action, but made without the finger lever, and with the breechblock made with a tailpiece. The steps required to convert the muzzle-loading musket to a breechloader with this action consists of removing the original barrel from the stock, cutting off a section of the breech end equaling the length of the conversion action, threading the barrel and fitting it to the action, routing out the stock as required to accept the action, refitting the barrel and action in the stock and installing a new hammer on the lock. There were a great many different “conversion” actions developed between 1860 and 1870 and the Peabody action was about as good as any of them. ==Legacy==