The
eigenvalues of an element
A ∈ SL(2,
R) satisfy the
characteristic polynomial : \lambda^2 \,-\, \mathrm{tr}(A)\,\lambda \,+\, 1 \,=\, 0 and therefore : \lambda = \frac{\mathrm{tr}(A) \pm \sqrt{\mathrm{tr}(A)^2 - 4}}{2}. This leads to the following classification of elements, with corresponding action on the Euclidean plane: • If |\mathrm{tr}(A)| , then
A is called
elliptic, and is conjugate to a
rotation. • If |\mathrm{tr}(A)| = 2 , then
A is called
parabolic, and is a
shear mapping. • If |\mathrm{tr}(A)| > 2 , then
A is called
hyperbolic, and is a
squeeze mapping. The names correspond to the classification of
conic sections by
eccentricity: if one defines eccentricity as half the absolute value of the trace (ε = |tr|; dividing by 2 corrects for the effect of dimension, while absolute value corresponds to ignoring an overall factor of ±1 such as when working in PSL(2,
R)), then this yields: \epsilon , elliptic; \epsilon = 1, parabolic; \epsilon > 1, hyperbolic. The identity element 1 and negative identity element −1 (in PSL(2,
R) they are the same), have trace ±2, and hence by this classification are parabolic elements, though they are often considered separately.
The same classification is used for SL(2,
C) and PSL(2,
C) (
Möbius transformations) and PSL(2,
R) (real Möbius transformations), with the addition of "loxodromic" transformations corresponding to complex traces;
analogous classifications are used elsewhere. A subgroup that is contained with the elliptic (respectively, parabolic, hyperbolic) elements, plus the identity and negative identity, is called an
elliptic subgroup (respectively,
parabolic subgroup, hyperbolic subgroup). The trichotomy of SL(2,
R) into elliptic, parabolic, and hyperbolic elements is a classification into
subsets, not
subgroups: these sets are not closed under multiplication (the product of two parabolic elements need not be parabolic, and so forth). However, each element is conjugate to a member of one of 3 standard
one-parameter subgroups (possibly times ±1), as detailed below. Topologically, as trace is a continuous map, the elliptic elements (excluding ±1) form an
open set, as do the hyperbolic elements (excluding ±1). By contrast, the parabolic elements, together with ±1, form a
closed set that is not open.
Elliptic elements The
eigenvalues for an elliptic element are both complex, and are
conjugate values on the
unit circle. Such an element is conjugate to a
rotation of the Euclidean plane – they can be interpreted as rotations in a possibly non-orthogonal basis – and the corresponding element of PSL(2,
R) acts as (conjugate to) a
rotation of the hyperbolic plane and of
Minkowski space. Elliptic elements of the
modular group must have eigenvalues {ω, ω−1}, where
ω is a primitive 3rd, 4th, or 6th
root of unity. These are all the elements of the modular group with finite
order, and they act on the
torus as periodic diffeomorphisms. Elements of trace 0 may be called "circular elements" (by analogy with eccentricity) but this is rarely done; they correspond to elements with eigenvalues ±
i, and are conjugate to rotation by 90°, and square to -
I: they are the non-identity
involutions in PSL(2). Elliptic elements are conjugate into the subgroup of rotations of the Euclidean plane, the
special orthogonal group SO(2); the angle of rotation is
arccos of half of the trace, with the sign of the rotation determined by orientation. (A rotation and its inverse are conjugate in GL(2) but not SL(2).)
Parabolic elements A parabolic element has only a single eigenvalue, which is either 1 or -1. Such an element acts as a
shear mapping on the Euclidean plane, and the corresponding element of PSL(2,
R) acts as a
limit rotation of the hyperbolic plane and as a
null rotation of
Minkowski space. Parabolic elements of the
modular group act as
Dehn twists of the torus. Parabolic elements are conjugate into the 2 component group of standard shears × ±
I: \left(\begin{smallmatrix}1 & \lambda \\ & 1\end{smallmatrix}\right) \times \{\pm I\}. In fact, they are all conjugate (in SL(2)) to one of the four matrices \left(\begin{smallmatrix}1 & \pm 1 \\ & 1\end{smallmatrix}\right), \left(\begin{smallmatrix}-1 & \pm 1 \\ & -1\end{smallmatrix}\right) (in GL(2) or SL±(2), the ± can be omitted, but in SL(2) it cannot).
Hyperbolic elements The
eigenvalues for a hyperbolic element are both real, and are reciprocals. Such an element acts as a
squeeze mapping of the Euclidean plane, and the corresponding element of PSL(2,
R) acts as a
translation of the hyperbolic plane and as a
Lorentz boost on
Minkowski space. Hyperbolic elements of the
modular group act as
Anosov diffeomorphisms of the torus. Hyperbolic elements are conjugate into the 2 component group of standard squeezes × ±
I: \left(\begin{smallmatrix}\lambda \\ & \lambda^{-1}\end{smallmatrix}\right) \times \{\pm I\}; the
hyperbolic angle of the hyperbolic rotation is given by
arcosh of half of the trace, but the sign can be positive or negative: in contrast to the elliptic case, a squeeze and its inverse are conjugate in SL₂ (by a rotation in the axes; for standard axes, a rotation by 90°).
Conjugacy classes By
Jordan normal form, matrices are classified up to conjugacy (in GL(
n,
C)) by eigenvalues and nilpotence (concretely, nilpotence means where 1s occur in the Jordan blocks). Thus elements of SL(2) are classified up to conjugacy in GL(2) (or indeed SL±(2)) by trace (since determinant is fixed, and trace and determinant determine eigenvalues), except if the eigenvalues are equal, so ±I and the parabolic elements of trace +2 and trace -2 are not conjugate (the former have no off-diagonal entries in Jordan form, while the latter do). Up to conjugacy in SL(2) (instead of GL(2)), there is an additional datum, corresponding to orientation: a clockwise and counterclockwise (elliptical) rotation are not conjugate, nor are a positive and negative shear, as detailed above; thus for absolute value of trace less than 2, there are two conjugacy classes for each trace (clockwise and counterclockwise rotations), for absolute value of the trace equal to 2 there are three conjugacy classes for each trace (positive shear, identity, negative shear), and for absolute value of the trace greater than 2 there is one conjugacy class for a given trace. ==Iwasawa or KAN decomposition==