Geoid

The geoid surface is irregular, unlike the reference ellipsoid (which is a mathematical idealized representation of the physical Earth as an ellipsoid), but is considerably smoother than Earth's physical surface. Although the "ground" of the Earth has excursions on the order of +8,800 m (Mount Everest) and −11,000 m (Marianas Trench), the geoid's deviation from an ellipsoid ranges from +85 m (Iceland) to −106 m (southern India), less than 200 m total. If the ocean were of constant density and undisturbed by tides, currents or weather, its surface would resemble the geoid. The permanent deviation between the geoid and mean sea level is called ocean surface topography. If the continental land masses were crisscrossed by a series of tunnels or canals, the sea level in those canals would also very nearly coincide with the geoid. Geodesists are able to derive the heights of continental points above the geoid by spirit leveling. Being an equipotential surface, the geoid is, by definition, a surface upon which the force of gravity is perpendicular everywhere, apart from temporary tidal fluctuations. This means that when traveling by ship, one does not notice the undulation of the geoid; neglecting tides, the local vertical (plumb line) is always perpendicular to the geoid and the local horizon tangential to it. Likewise, spirit levels will always be parallel to the geoid. Simplified example Earth's gravitational field is not uniform. An oblate spheroid is typically used as the idealized Earth, but even if the Earth were spherical and did not rotate, the strength of gravity would not be the same everywhere because density varies throughout the planet. This is due to magma distributions, the density and weight of different geological compositions in the Earth's crust, mountain ranges, deep sea trenches, crust compaction due to glaciers, and so on. If that sphere were then covered in water, the water would not be the same height everywhere. Instead, the water level would be higher or lower with respect to Earth's center, depending on the integral of the strength of gravity from the center of the Earth to that location. The geoid level coincides with where the water would be. Generally the geoid rises where the Earth's material is locally more dense, exerts greater gravitational force, and pulls more water from the surrounding area. ==Formulation==

. The geoid undulation (also known as geoid height or geoid anomaly), N, is the height of the geoid relative to a given ellipsoid of reference. N=h-H The undulation is not standardized, as different countries use different mean sea levels as reference, but most commonly refers to the EGM96 geoid. In maps and common use, the height over the mean sea level (such as orthometric height, H) is used to indicate the height of elevations while the ellipsoidal height, h, results from the GPS system and similar GNSS: H=h-N (An analogous relationship exists between normal heights and the quasigeoid, which disregards local density variations.) In practice, many handheld GPS receivers interpolate N in a pre-computed geoid map (a lookup table). So a GPS receiver on a ship may, during the course of a long voyage, indicate height variations, even though the ship will always be at sea level (neglecting the effects of tides). That is because GPS satellites, orbiting about the center of gravity of the Earth, can measure heights only relative to a geocentric reference ellipsoid. To obtain one's orthometric height, a raw GPS reading must be corrected. Conversely, height determined by spirit leveling from a tide gauge, as in traditional land surveying, is closer to orthometric height. Modern GPS receivers have a grid implemented in their software by which they obtain, from the current position, the height of the geoid (e.g., the EGM96 geoid) over the World Geodetic System (WGS) ellipsoid. They are then able to correct the height above the WGS ellipsoid to the height above the EGM96 geoid. When height is not zero on a ship, the discrepancy is due to other factors such as ocean tides, atmospheric pressure (meteorological effects), local sea surface topography, and measurement uncertainties. . ==Determination==

The undulation of the geoid N is closely related to the disturbing potential T according to '''Bruns' formula''' (named after Heinrich Bruns): : N=T/\gamma\,, where \gamma is the force of normal gravity, computed from the normal field potential U. Another way of determining N is using values of gravity anomaly \Delta g, differences between true and normal reference gravity, as per ''' (or Stokes' integral'''), published in 1849 by George Gabriel Stokes: : N=\frac{R}{4\pi \gamma_0}\iint_\sigma \Delta g \,S(\psi)\, d\sigma. The integral kernel S, called Stokes function, was derived by Stokes in closed analytical form. Note that determining N anywhere on Earth by this formula requires \Delta g to be known everywhere on Earth, including oceans, polar areas, and deserts. For terrestrial gravimetric measurements this is a near-impossibility, in spite of close international co-operation within the International Association of Geodesy (IAG), e.g., through the International Gravity Bureau (BGI, Bureau Gravimétrique International). Another approach for geoid determination is to combine multiple information sources: not just terrestrial gravimetry, but also satellite geodetic data on the figure of the Earth, from analysis of satellite orbital perturbations, and lately from satellite gravity missions such as GOCE and GRACE. In such combination solutions, the low-resolution part of the geoid solution is provided by the satellite data, while a 'tuned' version of the above Stokes equation is used to calculate the high-resolution part, from terrestrial gravimetric data from a neighbourhood of the evaluation point only. Calculating the undulation is mathematically challenging. The precise geoid solution by Petr Vaníček and co-workers improved on the Stokesian approach to geoid computation. Their solution enables millimetre-to-centimetre accuracy in geoid computation, an order-of-magnitude improvement from previous classical solutions. Geoid undulations display uncertainties which can be estimated by using several methods, e.g., least-squares collocation (LSC), fuzzy logic, artificial neural networks, radial basis functions (RBF), and geostatistical techniques. Geostatistical approach has been defined as the most-improved technique in prediction of geoid undulation. ==Relationship to mass density==

and Geoid anomalies caused by various crustal and lithospheric thickness changes relative to a reference configuration. All settings are under local isostatic compensation. Variations in the height of the geoidal surface are related to anomalous density distributions within the Earth. Geoid measures thus help understanding the internal structure of the planet. Synthetic calculations show that the geoidal signature of a thickened crust (for example, in orogenic belts produced by continental collision) is positive, opposite to what should be expected if the thickening affects the entire lithosphere. Mantle convection also changes the shape of the geoid over time. in units of Gal., using pseudo color and shaded relief. The surface of the geoid is higher than the reference ellipsoid wherever there is a positive gravity anomaly or negative disturbing potential (mass excess) and lower than the reference ellipsoid wherever there is a negative gravity anomaly or positive disturbing potential (mass deficit). This relationship can be understood by recalling that gravity potential is defined so that it has negative values and is inversely proportional to distance from the body. So, while a mass excess will strengthen the gravity acceleration, it will decrease the gravity potential. As a consequence, the geoid's defining equipotential surface will be found displaced away from the mass excess. Analogously, a mass deficit will weaken the gravity pull but will increase the geopotential at a given distance, causing the geoid to move towards the mass deficit. The presence of a localized inclusion in the background medium will rotate the gravity acceleration vectors slightly towards or away from a denser or lighter body, respectively, causing a bump or dimple in the equipotential surface. The largest absolute deviation can be found in the Indian Ocean Geoid Low, 106 meters below the average sea level. Another large feature is the North Atlantic Geoid High (or North Atlantic Geoid Swell), caused in part by the weight of ice cover over North America and northern Europe in the Late Cenozoic Ice Age. ==Temporal change==

Recent satellite missions, such as the Gravity Field and Steady-State Ocean Circulation Explorer (GOCE) and GRACE, have enabled the study of time-variable geoid signals. The first products based on GOCE satellite data became available online in June 2010, through the European Space Agency. ESA launched the satellite in March 2009 on a mission to map Earth's gravity with unprecedented accuracy and spatial resolution. On 31 March 2011, a new geoid model was unveiled at the Fourth International GOCE User Workshop hosted at the Technical University of Munich, Germany. Studies using the time-variable geoid computed from GRACE data have provided information on global hydrologic cycles, mass balances of ice sheets, and postglacial rebound. From postglacial rebound measurements, time-variable GRACE data can be used to deduce the viscosity of Earth's mantle. ==Spherical harmonics representation==

Spherical harmonics are often used to approximate the shape of the geoid. The current best such set of spherical harmonic coefficients is EGM2020 (Earth Gravitational Model 2020), determined in an international collaborative project led by the National Imagery and Mapping Agency (now the National Geospatial-Intelligence Agency, or NGA). The mathematical description of the non-rotating part of the potential function in this model is: V=\frac{GM}{r}\left(1+{\sum_{n=2}^{n_\text{max}}}\left(\frac{a}{r}\right)^n{\sum_{m=0}^n} \overline{P}_{nm}(\sin\phi)\left[\overline{C}_{nm}\cos m\lambda+\overline{S}_{nm}\sin m\lambda\right]\right), where \phi\ and \lambda\ are geocentric (spherical) latitude and longitude respectively, \overline{P}_{nm} are the fully normalized associated Legendre polynomials of degree n\ and order m\ , and \overline{C}_{nm} and \overline{S}_{nm} are the numerical coefficients of the model based on measured data. The above equation describes the Earth's gravitational potential V, not the geoid itself, at location \phi,\;\lambda,\;r,\ the co-ordinate r\ being the geocentric radius, i.e., distance from the Earth's centre. The geoid is a particular equipotential surface, with additional coefficients extending to degree 2190 and order 2159. EGM2020 is the international follow-up that was originally scheduled for 2020 (still unreleased in 2025), containing the same number of harmonics generated with better data. ==See also==